S e c t i o n F i v e

Symptom

Docking Problems

Notebook does not turn on when installed in a LANdock or Port Replicator.

Floppy Disk Drive Problems

You cannot access your floppy disk.

Possible Cause

1.LANdock or Port Replicator AC adapter is not plugged in.

2.Notebook is not properly seated in the LANdock or Port Replicator.

1.Security is set to protect access to floppy disk data.

2.Floppy disk is not loaded correctly.

3.BIOS setup utility has Diskette Controller: Disabled.

4.The floppy disk drive may not be properly installed.

5.You tried to write to a write protected floppy disk.

Possible Solution

1.Provide power to the LANdock or Port Replicator.

2.Remove and re-dock your notebook and verify that the Docked LED illuminates.

1.Verify your password and security settings.

2.Eject floppy disk, check orientation and re-insert. (See Floppy Disk Drive on pages 34–36.)

3.Revise the setup utility I/O Device Configuration Submenu settings. (See Main Menu on pages 71–76.)

4.Remove and re-install your floppy disk drive. (See Multi-function Bay 1 on page 117, or External Installation of a Floppy Disk Drive on page 121.)

5.Eject the floppy disk and set it to write enabled. (See pages 35–36.)

150

Page 160
Image 160
Fujitsu 990TX2 manual Symptom Docking Problems Floppy Disk Drive Problems