Fujitsu 990TX2 manual Hard Drive Access Indicator, Floppy Disk Drive Access Indicator, P O I N T

S e c t i o n T w o

P O I N T

If you do not wish to have the CD automatic insertion function active you can disable it.

To disable the CD automatic insertion function do as follows:

1.Save all data and close all applications.

2.Click on the Start button.

3.Point to Settings.

4.Click on the Control Panel. The control panel window will be displayed.

5.Double click on the System icon. The system properties dialogue box will be displayed.

6.Click on the Device Manager tab. The device list will be displayed.

7.Click on the + to the left of the CD-ROM icon. The CD-ROM drive or DVD drive manufacturer’s name and model

will be displayed.

8.Click on the CD-ROM drive or DVD drive manufacturer’s name and model.

9.Click on Properties. The CD-ROM drive or DVD drive manufacturer’s name and model properties dialogue box will be displayed.

10.Click on the Settings tab.

11.Click on the automatic insertion notification box to toggle it off.

12.Click on OK.

13.Click on OK in the system properties dialogue box.

14.Restart your notebook according to the message displayed.

You can re-enable the function by repeating the process except in step 11 change the setting to On.

Hard Drive Access Indicator

The Hard Drive Access indicator tells you when either the internal hard drive or the optional second hard drive is being accessed.

P O I N T

The Hard Drive Access indicator does not show which drive is being accessed. It works the same for either the internal hard drive or the optional second

hard drive.

Floppy Disk Drive Access Indicator

The Floppy Disk Drive Access indicator tells you a floppy disk drive is being accessed, regardless of whether a drive is installed in Multi-function Bay 1or on the external floppy disk drive port. The Floppy Disk Drive Access indicator will flash when your software tries to access a floppy disk drive even if no floppy disk drive is installed.

PC Card Access Indicators

The PC Card Access indicators tell you when an installed PC Card is being accessed. Card 1 is the bottom connector inside the slot and Card 2 is the upper connector inside the card slot.

22