Fujitsu 990TX2 manual Symptom PC Card Problems, Possible Cause, Possible Solution

Models: 990TX2

1 209
Download 209 pages 39.4 Kb
Page 164
Image 164
Symptom

S e c t i o n F i v e

Symptom

PC Card Problems

A card inserted in the PC Card slot does not work or is locking up the system.

Possible Cause

2.The device may have been installed with an application running and your notebook doesn’t know it’s there.

3.Your software may not have the correct software driver active.

4.You may have the wrong I/O address selected for your device.

5.Your device and another device are assigned the same I/O address.

1.The card is not properly installed

2.The card may have been installed with an application running and your notebook doesn’t know it’s there.

3.Your software may not have the correct software driver active.

4.You may have the wrong I/O address selected for your PC Card device.

Possible Solution

2.Close your application and restart your notebook.

3.See your software documentation and activate the correct driver.

4.See your device documentation and software documentation to determine the required I/O address.

5.Check all I/O addresses in the BIOS setup utility and your other installed hardware and software and make sure there are no duplications.

1.Remove and re-install the card. (See PC Cards on pages 126–128.)

2.Close your application and restart your notebook.

3.See your software documentation and activate the correct driver.

4.See your PC Card documentation to determine the required I/O address.

154

Page 164
Image 164
Fujitsu 990TX2 manual Symptom PC Card Problems, Possible Cause, Possible Solution