Fujitsu 990TX2 manual Installing a Device in Multi-functionBay, C A U T I O N

S e c t i o n F o u r

C A U T I O N

The system must be in Suspend mode before attempting to insert a device into either of the Multi-function Bays. Failure to do so can cause damage to your notebook or the device.

Installing a Device in Multi-function Bay 1

3.Orient the item to be installed with the con- nector toward the body of your notebook and the flat side of the device with the little metal square toward the body of your notebook.

4.Align the grooves on the side of the

device with the tracks in the side of the bay. (Figure 4-2.)

5.Slide the device firmly toward the back of your notebook until it clicks into place.

6.Press the Suspend/Resume Button to reacti- vate the notebook from the Suspend mode.

7.The Tioman software will automatically detect the new device and place it online.

Installing a Device in Multi-function Bay 2

3.Orient the device to be installed with the connector toward the body of your notebook and closer to the up side of the device. (Figure 4-3.)

4.Align the grooves on the sides of the

device with the tracks in the sides of the bay. (Figure 4-3.)

5.Slide the device toward the back of your notebook until it clicks into place. Make sure that the release button has fully returned to its latched position.

6.Press the Suspend/Resume Button to reacti- vate the notebook from the Suspend mode.

7.The Tioman software will automatically detect the new device and place it online.

120