Fujitsu 990TX2 manual Symptom Shutdown and Startup Problems, Possible Cause, Possible Solution

L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u

T r o u b l e s h o o t i n g

Symptom

Shutdown and Startup Problems

The Suspend/Resume button does not work.

The system powers up, and displays the power on information, but fails to load the operating system.

Possible Cause

6.The batteries are too hot or too cold. (See Batteries on page 26.)

1.The Suspend/Resume button is disabled from the Advanced submenu of the Power Savings menu of the setup utility.

2.You did not hold the button in long enough.

3.There may be a conflict with the application software.

1.The boot sequence settings of the setup utility are not compatible with your configuration.

Possible Solution

6.Restore the notebook to normal operating temperature. (The Charging indicator on the Status Indicator panel will flash when the battery is outside its operating range.)

1.Enable the button from the setup utility. (See page 102.)

2.Hold the button longer. This may need to be a very long time if your application is preventing the CPU from checking for button pushes.

3.Close all applications,and try the button again.

1.Set the operating source by pressing the Esc key while the Fujitsu logo is on screen or use the F2 key and enter the setup utility and adjust the source settings from the Boot menu on pages 106–107.

161