Fujitsu 990TX2 manual Serial Port Devices, Parallel Port Devices, USB Devices

S e c t i o n F o u r

C A U T I O N

The internal modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a digital PBX as it may cause serious damage to the internal modem or your entire notebook. Consult your PBX manufacturer’s docu- mentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem.

SERIAL PORT DEVICES

To connect an RS-232 device to the serial port on the rear panel of your notebook, be sure that the connector is the right size and aligned, then push in until it is fully seated. When it is seated, tighten the hold-down screws, one on each end of the connector. (See Figure 1-7 on page 8.)

PARALLEL PORT DEVICES

To connect a parallel interface device to the parallel port on the rear panel of your note- book, be sure that the connector is the right size and aligned,then push in until it is fully seated. When it is seated tighten the screw locks on either end of the connector.

(See Figure 1-7 on page 8.)

USB DEVICES

When installing a device on either of the USB ports on the rear panel of your notebook, be sure that the connector is the right size, aligned, and fully seated. (See Figure 1-7 on page 8.)

C A U T I O N

Due to ongoing changes in USB technology and standards, not all USB devices and/or drivers are guaranteed to work.

132