Fujitsu 990TX2 manual Midi/Joystick Devices, To Remove or Install a Battery in the Battery Bay

L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u

U s e r I n s t a l l a b l e F e a t u r e s

P O I N T

The main battery should only be removed for storage or service.

To Remove or Install a Battery in the Battery Bay:

1.Close all files and exit all applications.

2.Turn off power to your notebook, close the display and remove the AC adapter. (See pages 24–25 for more information.)

3.Turn your notebook upside down with the bay openings toward you.

To Remove a Battery from the Battery Bay:

4.Slide the battery release button on the bot- tom right side of the battery bay to your right. (Figure 4-12.)

5.Slide the battery forward until it is clear of the compartment. This will require some force. Use the finger ridge on the bottom of the battery.

To Install a Battery in the Battery Bay:

4.Orient the battery to be installed with the finger ridge away from the body of your notebook and the connector toward the body of your notebook.

5.Align the grooves on the side of the battery with the tracks in the side of the bay. (Figure 4-12.)

6.Slide the battery toward the back of your notebook until it clicks into place. Make sure that the battery release button has returned to its base position against the side of the battery.

C A U T I O N

The main battery can not be warm swapped.

MIDI/JOYSTICK DEVICES

To connect a MIDI/Joystick Device:

1.Close all files and exit all applications.

2.Turn off power to your notebook, close the display and remove the AC adapter. (See pages 24–25 for more information.)

3.Open the MIDI port cover on the right side panel of your notebook, (Figure 4-13), by gently pulling on the bott om edge of the cover and lifting it up.

4.Align the connector of the adapter cable with the connector towards the body of your note- book. (Figure 4-13.)

5.Insert the connector firmly into the port on your notebook until it clicks.

129