Fujitsu 990TX2 manual Symptom, Possible Cause, Possible Solution

L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u

T r o u b l e s h o o t i n g

Symptom	Possible Cause
	5. Power switch is already in the On position.

6. There is no battery installed and there is no power adapter (AC or auto/airline) installed.

7. The main battery is installed but is faulty, there is no optional second battery installed and there is no power adapter (AC or auto/ airline) installed.

Possible Solution

5.Try the Suspend/Resume button. If that doesn’t work,slide your power switch firmly to the front, pause 10 seconds or more and then firmly to the rear. If you shut down your notebook from Windows 95, you are really in a pseudo-off state,there is some power on and you can restart with the Suspend/Resume button. (See Power Off on pages 24–25)

6.Use the Status Indicator panel to verify the presence and condition of the batteries. (See Figure 2-3 on page 19.) Install a Power adapter or install a battery in Multi-function Bay 2 in the front of your notebook. (See Multi-function Bay Devices on pages 117–120.)If the battery is not charged use a Power adapter until it is charged.

7.Use the Status Indicator panel to verify

the presence and condition of the batteries. (See Figure 2-3 on page 19.) If a battery is indicating a short, remove that battery and operate from another power source or replace that battery.

157