S e c t i o n F o u r
Warm-swappable Devices in
Multi-function Bay 1 and 2
Devices designed for use in
This icon provides a visual cue for the currently inserted device. You will immediately notice whether a diskette
Connector for
Bay 1 Device
Figure 4-2 Removing and Installing a
Device in Multi-function Bay 1
C A U T I O N
Only one optional second battery is supported. Your notebook does not sup- port three (3) batteries simultaneously.
Removing a Device in either
Multi-function Bay 1 or 2.
1.Close any open files on the removable device that you plan to eject from the computer, if a device is currently installed.
2.
3.Select the Swap Device menu item.
4.When the notebook goes into the Suspend mode you can safely remove the device from the
To Remove a Device from Multi-function Bay 1
5.Slide the release latch on the left side panel toward the bottom of your notebook.
6.While holding the release button in the release position use the
118