Fujitsu 990TX2 manual Theft Prevention Lock, To Disconnect a MIDI/Joystick Device

S e c t i o n F o u r

Connector to

Connector

Locking Screws

Joystick

Port Cover

Connector Release Buttons

Figure 4-13 Installing a MIDI/joystick Device

6.Align the connector of the MIDI device and the adapter cable connector.

7.Push the connectors together until seated and then tighten the screw locks on either side of the connectors.

To Disconnect a MIDI/Joystick Device:

1.Close all files and exit all applications

2.Turn off power to your notebook, close the display and remove the AC adapter. (See pages 24–25 for more information.)

3.Squeeze the releases on the sides o f the MIDI device connector together. (The connector is next to the body of your notebook.) (Figure 4-13.)

4.Pull the connector free.

5.Close the port cover on your notebook by pushing it down and pressing it into the side of your notebook until it latches.

6.Unscrew the locking screws on either side of the connectors for the MIDI device and the adapter cable.

7.Pull the adapter cable free of the MIDI device.

THEFT PREVENTION LOCK

A physical security system lock can be installed on the right side of your notebook. (See Figure 1-5 on page 7 for the location of the lock slot.)

Simply insert the key end of your security system in the slot, rotate 90 degrees and lock. (See Figure 1-5 on page 7.)

130