Fujitsu 990TX2 manual Menu Field, Options, Default, Description, Interrupt

S e c t i o n T h r e e

Table 3-5 Fields, Options and Defaults for the I/O Device Configuration Submenu of the Advanced Menu

Menu Field	Options	Default	Description
Interrupt:	IRQ 3; IRQ 4;	[IRQ 3]	Allows user to set the serial port interrupt when port B
	IRQ 10; IRQ 11.		is Enabled.
Base I/O address:	100;108; 110;118.	[118]	When the mode for serial port B is set to FIR,this option is
			available allowing the user to set the base I/O address for the
			FIR of serial port B.
DMA channel:	DMA 1; DMA 3.	[DMA 3]	When the mode for serial port B is set to FIR,this option is
			available allowing the user to set the DMA channel for the
			FIR of serial port B.
Parallel port:	Disabled; Enabled; Auto.	[Enabled]	Configures the parallel port using either no configuration
			(Disabled),a user defined configuration (Enabled), or by
			allowing the BIOS or OS to choose the configuration (Auto).
Mode:	Output Only;	[Bi-directiona1]	When the parallel port is enabled this option is available allowing
	Bi-directional; ECP.		the user to set the mode for the parallel port. Bi-directional allows
			two-way transfer of information between your notebook and a
			connected parallel device.Output Only (Half Duplex) allows
			information to be transferred in only one direction,from your
			notebook to the printer or similar device.ECP Mode allows
			communication with the ECP class of parallel I/O devices.

74