Fujitsu 990TX2 manual To install a PC Card, C A U T I O N, 11Installing and Removing a PC Card

C A U T I O N

Do not insert a PC Card into a slot if there is water or any other substance on the card. If you do, you may permanently damage the card, your notebook, or both.

To install a PC Card:

1.See your PC Card manual for instructions on installation of that specific card.

2.Make sure that there is not already a PC Card in the slot you wish to use (1 or 2). If there is, eject it,as described in Removing PC Cards on page 128.

U s e r I n s t a l l a b l e F e a t u r e s

PC Card Lock Eject Button Slot 2

PC Card Eject Button Slot 1

Figure 4-11 Installing and Removing a PC Card

C A U T I O N

Some PC Cards can only be installed or removed with the power in Suspend mode or off. Please check the card documentation for correct usage.

L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u

C A U T I O N

Installing or removing a card while your notebook is in the process of going through the power on or power off sequence may damage the card and/or your notebook.

3.Insert the PC Card in the card slot, with the product name label facing up. (Figure 4-11.)

4.When the card is installed,lock it in place by sliding the lock button to the right. (Figure 4-11.)

127