Fujitsu 990TX2 manual Double-Clicking, P O I N T, C A U T I O N

S e c t i o n T w o

around on the screen – up, down,left and right. A light pressure with the tip of your finger is all that is required to operate the ErgoTrac. The more pressure you use the faster the cursor will move. The second part of the ErgoTrac pointing device – the buttons – function as mouse but- tons, and the functions they perform depend on the application you are running. Figure 2-6 shows the position of the ErgoTrac pointing device and buttons.

P O I N T

An external mouse can be connected to either of the PS/2 ports on the right side of the notebook, and used at the same time as the ErgoTrac pointing device.

Left Click Left Double Click

Figure 2-7 Clicking

Clicking

Clicking means pushing and releasing a button. To left-click move the screen cursor to the item you wish to select, press the left pointing device button once,and then immediately release it.

To right-click,move the mouse cursor to the item you wish to select, press the right pointing device button once,and then immediately release it. (Figure 2-7.)

Double-Clicking

Double-clicking means following the preceding Clicking procedure, but pressing the pointing device button twice in rapid succession. Double-clicking works with either the left

or the right button.

C A U T I O N

If the interval between clicks is too long, the double-click will not be executed.

P O I N T

The interval between presses for

double clicking, and other parameters of pointing and selecting, can be adjusted with the selections in the dialog box

of the mouse icon in your Windows Control panel.

30