Kodak C1013 manual Troubleshooting

Troubleshooting

If...	Try one or more of the following
In Review mode, a	■ Transfer the picture to the computer (see page 35).
blue or black	■ Take another picture. If problem continues, try internal memory and/or
screen is displayed
instead of a	another memory card.
picture.
Shutter button	■ Turn on the camera (see page 2).
does not work.	■ Transfer pictures to the computer (see page 35), delete pictures from
	the camera (see page 14), switch image storage locations (see
	page 27), or insert a card with available memory (see page 3).
Picture is too light.	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.
	■ Decrease Exposure Compensation (see page 29).
Picture is not clear.	■ Clean the lens (see page 48).
	■ Make sure your camera is not in Close-up mode.
	■ Move so there is at least 2 ft (0.6 m) between the camera and the
	subject.
	■ Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.	■ Turn on the flash (see page 7).
	■ Move so there is no more than 10.5 ft (3.2 m) in wide angle and
	5.9 ft (1.8 m) in telephoto between the camera and the subject.
	■ Use Fill flash (see page 7) or change your position so light is not
	behind the subject.
	■ Increase Exposure Compensation (see page 29).
Camera does not	■ Purchase a certified SD or SDHC card.
recognize	■ Insert a card into the slot, then push to seat (see page 3).
SD/SDHC card.
Camera freezes up	■ Turn the camera off, then back on. Make sure the camera is turned off
when a card is	before inserting or removing a card.
inserted or
removed.
40	www.kodak.com/go/support