Onkyo DR-S2.0 instruction manual Troubleshooting, Symptoms Causes Remedies Pages

Other

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective instruction manuals of the connected components and TV.

	Symptoms	Causes	Remedies	Pages
	The DVD Receiver doesn’t	• The power cord (mains lead) is	• Check the connection of the power cord	16
	switch on.	disconnected.	(mains lead).	16
		• The main power is set to OFF.	• Turn on the main power.
		• There is external noise interfering with the	• Switch off the main power, then switch it on	16
		computer circuits of the DVD Receiver.	again. If not recovered, disconnect the power
		• The AC fuse is blown.	cord (mains lead), then connect it again.	–
			• Contact your nearest Onkyo service
			center.
	No sound is reproduced.	• The muting function is activated.	• Deactivate the muting function.	30
		• The DVD Receiver is not properly	• Check the connections to the DVD	10–16
		connected.	Receiver.	–
		• The amplifier protection circuitry has	• Contact your nearest Onkyo service
		activated. (The STANDBY indicator	center.
		flashes.)		31
		• Headphones are connected.	• Decrease the volume, then disconnect the
Amplifier			headphones.
	the center speaker.	“Orchestra.”	speaker when the listening mode is	13
	No sound or very little	• The speakers are not properly connected.	• Check the speaker connections.
	sound is reproduced from	• The listening mode is set to “Stereo” or	• No sound is reproduced from the center	36
			“Stereo” or “Orchestra.”
		• The volume level of the center speaker	• Adjust the volume level of the center	19, 37
		(“Center”) is set to minimum.	speaker.
		• A speaker configuration without the center	• Check that the selected speaker	17
		speaker is selected.	configuration includes the center speaker.
	No picture appears on the	• The TV is not set to receive the output	• Set the TV to the DVD Receiver’s input.	–
	TV screen.	signals from the DVD Receiver.
		• The video cable is not connected	• Check the connections between the DVD	10
		securely.	Receiver and TV set.
		• Only the S video connection is made.	• Also make video connection.	10, 11
	The sound of the playback	• Another input source is selected.	• Select the appropriate input source.	28
	source is not heard.
	The buttons on the remote	• Power supply fluctuations or other	• Switch off the main power, then switch it on	16
	controller and DVD	abnormalities such as static electricity	again. If not recovered, disconnect the power
	Receiver do not operate.	may interrupt correct operation.	cord (mains lead), then connect it again.
	The DVD Receiver does	• No disc is inserted.	• Insert a disc. (Check that “DVD,” “VCD,” or	20
	not start playback.		“CD” is lit in the DVD Receiver’s display.)
		• The region number of the disc is	• See the rear panel of the unit to check the	4
		unmatched to the DVD Receiver.	playable region number.
		• An unplayable disc is inserted.	• Check the playable discs.	9
		• The disc is placed upside down.	• Place the disc with the playback side	20
			down.
		• The disc is not placed within the disc tray	• Place the disc within the proper guide on	20
		guide.	the disc tray.
		• The disc is dirty.	• Eject the disc and clean it.	21, 9
		• The parental lock function is activated.	• Deactivate the parental lock function or	56
CD)			change the parental lock level.
	The DVD related operation	• The SETUP button is pressed and the	• Press SETUP once. If the buttons still	50, 21
CD/Audio
	buttons do not work.	DVD Receiver stands by for the next	don’t work, press r.
		function setting command.
	Brightness is unstable or	• Copy protection is activated.	• Connect the DVD Receiver directly to the	10
(VIDEO	noise is visible in the		TV. Avoid connecting the DVD Receiver to
	playback picture.		the TV through a VCR.
	The playback picture is	• The disc is dirty.	• Eject the disc and clean it.	21, 9
DVD	occasionally distorted.	• It is in fast forward or fast reverse	• Sometime a small amount of picture	22
		playback.	distortion may appear. This is not a
			malfunction.
	Playback doesn’t follow the	• The DVD Receiver is in repeat playback	• Resume normal playback.	39, 40, 41
	course of the disc’s	mode, memory playback mode, or
	programs.	random playback mode, etc.
	The picture from the DVD	• The TV is not set to receive the output	• Set the TV to the DVD Receiver’s input.	–
	Receiver doesn’t appear	signals from the DVD Receiver.
	on the TV screen.
	No sound is reproduced.	• A wrong sound signal conversion method	• Check the current sound signal	46, 54
		is selected.	conversion method, and select the right
			one.

63