Various Functions Common to all the Sources
Turning on/off the SPEAKERS A/ SPEAKERS B Systems
You can turn on or off the speaker systems connected to the SPEAKERS A and SPEAKERS B connectors individually.
Note
If you turn on the SPEAKERS B system, the SPEAKERS A system also reproduces stereo sound automatically. (The listening mode is set to “Stereo.” See page 36.)
Even if you turn off the SPEAKER B system later, the listening mode remains to “Stereo” until you select another listening mode.
The lit SP A and SP B indicators indicate the corresponding speaker systems are On.
SP A B
STANDBY/ON
MASTER VOLUME
STANDBY |
| ACOUSTIC |
|
|
|
|
|
| |
POWER | DISPLAY | CONTROL FM MODE |
|
|
|
|
| ||
ON | OFF |
| DVD / CD |
|
|
|
|
|
|
PHONES | INPUT |
| PRESET |
|
| SUBWOOFER | SPEAKER SPEAKER | ||
|
|
| TUNING/PRESET | MEMORY | SURROUND STEREO | T – D | MODE | A / B | SETUP |
PHONES jack Display | Light | MASTER | SPEAKER |
|
| VOLUME | A/B |
Adjusting the Volume
The volume of the front left and right, center, surround left and right, and subwoofer speakers will be adjusted at the same time.
When headphones are connected (see next page), you can adjust the volume of the sound through the headphones.
Operating with the remote controller
Press VOL 
/ 
.
VOL
Operating with the remote controller
SP A Press SP A to turn on or off the
7SPEAKERS A system.
SP B | Press SP B to turn on or off the |
+10 | SPEAKERS B system. |
|
Note
It is impossible to turn off both speakers at the same time.
Operating with the unit
SPEAKER | Press SPEAKER A/B repeatedly. | |||
A / B | Each press of the button changes the On/Off | |||
| ||||
| mode as follows: | |||
|
| → |
| SPEAKERS A system turns on. |
|
| Only the | ||
|
|
| ||
|
|
|
| ↓ |
|
|
| Only the | SPEAKERS B system turns on. |
|
|
|
| ↓ |
|
|
| Both the | SPEAKERS A and B systems |
|
|
| ||
|
|
| turn on. | |
Operating with the unit
MASTER VOLUME
Turn MASTER VOLUME clockwise to increase the volume, or counterclockwise (anticlockwise) to decrease the volume.
Muting the Sound
Remote | Press MUTING. |
controller only | “Muting” appears in the multipurpose display |
MUTING | for about three seconds. Also the MUTING |
| indicator flashes in the display during the |
| muting mode. |
| MUTING |
| To restore the sound, press MUTING again. |
Tip
If you turn off the unit during muting, and turn it on again, the sound will be restored.
30
