Yamaha AV Receiver owner manual Special considerations for DTS software, For DVDs encoded in DTS

ZONE 2 (U.S.A., CANADA, AUSTRALIA, U.K. AND EUROPE MODELS ONLY)

■To control the power of the main unit and Zone 2 unit

To turn all units (the main unit and Zone 2 unit) to standby:

While holding down AMP, press STANDBY.

To turn on all units (the main unit and Zone 2 unit):

While holding down AMP, press SYSTEM POWER.

y

STANDBY and SYSTEM POWER work differently depending on the selected mode.

Mode	TRANSMIT	STANDBY/
	indicator	SYSTEM POWER
		Press STANDBY to turn
Main mode	Off	the main unit to standby.
		Press SYSTEM POWER
		to turn on the main unit.
		Press STANDBY to turn
		the Zone 2 component to
Zone 2 mode	On	standby.
		Press SYSTEM POWER
		to turn on the Zone 2
		component.

■Special considerations for DTS software

The DTS signal is a digital bitstream. If you attempt to send the DTS signal to the second room you will only hear digital noise (that may damage your speakers). Thus, the following considerations and adjustments need to be made when playing DTS-encoded discs.

For DVDs encoded in DTS

Only 2 channel analog audio signals may be sent to the second room.

Use the disc menu to set the DVD player’s mixed 2- channel left and right audio outputs to the PCM or Dolby Digital soundtrack.

For CDs encoded in DTS

To avoid unexpected noise, DO NOT USE the Zone 2 feature with CDs encoded in DTS.

OPERATION ADVANCED

71