LOADING THE FILM
2. Place the film cartridge into the
film chamber. Extend the film leader to the "FILM TIP" mark, making sure it lays flat.
•If the film tip extends beyond the index mark, push the excess film back into the cartridge.
18
3. Close the back cover.
• The film automatically advances to the first frame
and 
appears on the data panel.
• If the film has been loaded improperly, 
will blink on the data panel and the shutter will remain locked. Open the back cover and repeat the loading procedure.
•Once the film is loaded, the back cover will lock preventing accidental opening until the film is rewound (film chamber lock).
19