RBH Sound RBH 180 manual When brake is applied

		TROUBLESHOOTING GUIDE
PROBLEM	CORRECTION
Extreme vibration	1.	Check blades and make sure they are not bent, out of balance or loose. Replace if necessary.
occurs when blade is 2.		Check belt for burn spots or irregularities that might cause vibrations. Replace if necessary.
engaged	3.	Check quill assemblies for damage or wear. Replace if necessary.

4.Check for worn or damaged blade engagement parts. Repair or replace if necessary.

5.Check engine drive pulley inner surface. If inner surface is rough or split, pulley should be replaced.

6.Check under side of mower deck housing for accumulation of clippings. Remove accumulated clippings.

7.Check for loose or damaged engine mounts. Tighten or replace as necessary.

8.Check blade belt tension per manual. Adjust if necessary.

Unit drive belt slips	1.	Check unit drive belt adjustment. Ajust if necessary.
	2.	Check for damaged or broken clutching idler spring. Replace if necessary.
	3.	Check belt for wear or damage. Replace if necessary.
	4.	Check for and remove any foreign objects obstructing clutching idler mechanism.
	5.	Check for split engine or transmission pulley. Replace if necessary.
	6.	On Shift-on-the-Go units, check for proper free play in cable adjustment.
Mower scalps lawn	1.	Check mower height adjustment setting and readjust if needed. Scalping is more likely on rough or uneven
		lawns.
	2.	Check for damage to mower deck housing; repair if necessary.
	3.	Check for bent blades or quill assemblies. Replace if necessary.
	4.	Check mower deck levelling adjustment and adjust it if necessary.
Unit drive belt squeals	1. Check lawn tractor drive belt adjustment and lawn tractor brake adjustment per manual.Adjust if necessary.
when brake is applied	2. Check for and remove any foreign objects obstructing clutching idler mechanism.
Unit drive belt comes	1. Check belt tension. Adjust if necessary.
off during use	2.	Check belt guides. Adjust if necessary.
	3.	Check for split or damaged pulleys. Replace if necessary.
	4.	Check clutching idler pulley alignment. If out of alignment, idler bracket may be bent. Replace if necessary.
Unit will not propel	1.	See steps 1 through 5 in Unit drive belt slips section of this chart.
itself when clutch is	2.	Check engine, transmission or transaxle pulley for sheared or missing key. Replace if necessary.
engaged	3.	Check transaxle to make sure it is operable.
Extreme vibration	1.	Check for split or damaged pulley. Replace if necessary.
occurs when clutch is	2. Check belt for irregularities or burned spots. Replace if necessary.
engaged	3.	Make sure belt tension is correct. Adjust if necessary.
	4.	Check clutching idler assembly for wear or damage. Replace parts if necessary.
Unit will not shift or	1. Check shifting procedure.
shifts hard	2.	Check lawn tractor drive belt adjustment and lawn tractor brake adjustment per manual.Adjust if necessary.
	3.	Have transaxle checked by an authorized service dealer.
Steering slips or is	1.	Check for steering sector gear and pinion looseness. If gears are loose, make sector gear adjustment.
loose	2.	Check ball joints for wear. Replace if necessary.
Engine will not turn	1. Check starting procedure. Make sure starting instructions are followed.
over	2.	Check fuse.
	3.	Check battery for charge. Make sure battery has been activated and charged.
	4.	On new units, remove spark plug and check cylinder for accumulation of oil due to improper handling.
	5.	Make visual check of electrical system to make sure all connections and lockout switches are secure.
	6.	Check engine according to engine manufacturerÕs instructions.
	7.	Have electrical system checked by an authorized service dealer.
Engine turns over but	1. Check starting procedure. Make sure starting instructions are followed.
will not start	2.	Make sure fuel tank is filled with clean, fresh fuel.
	3.	Make sure fuel shut-off is open.
	4.	Make sure that throttle is in start or fast position.
	5.	Check engine according to engine manufacturerÕs instructions.
	6.	Have wiring and lockout switches checked by an authorized service dealer.
	7.	Check fuel filter for obstructions.
	8.	Check for choke usage.
Blocked discharge	1.	Take away the grass collector, and clean the discharge tunnel.
funnel

English – 23