OPERATION
IMPORTANT
In
For the continuing- of the cutting you must push the
4.Depress slowly the forward movement pedal to reach the desired speed.
IMPORTANT
While starting the blades, keep the throttle in the middle position, to save the belt and clutch from premature wear and possible damage.
Fig. 19
MOWER DECK GAUGE WHEELS (FIG. 20)
The mower deck gauge wheels must always be in the lower position. Refer to fig. 20.
SPEED RANGES
The slowest speed is used for mowing on slopes or mowing high wet grass.
The lower the grass is, the higher the speed should be. When tractor is used for transport (not cutting). Depress the forward movement pedal for maximum speed.
ALWAYS: In case of any obstacles, immediately disengage the blades and lift the mower deck to the highest level.
IMPORTANT
As soon as the blades strike any solid object the shear bolts will break. Immediately stop the engine! Check the blades! Replace the broken shear bolts only with factory originals. Check to make sure that all blade mounting bolts are tightened.
Fig. 20
IMPORTANT
Before starting cutting grass, take care of the proper positioning of the grass collector.
RIDING AND MOWING
Proceed with the following steps:
1.Start engine and drive tractor to the lawn.
2.When on the lawn, engage mower clutch with toggle switch (fig. 16).
3.Switch the MAN/AUTO button to the lower AUTO position (fig. 11, d).
MOWING HINTS
1.We advise mowing the lawn in a longitudinal and cross direction, overlapping previous cut, which allows the lifting action of the blades into the cutting path.
2.Forward speed of the lawn tractor must be controlled in accordance with the type and quantity of grass being mowed.
IMPORTANT
The more grass that must be cut, the slower the forward speed should be.
10 – English