ADJUSTMENTS

TRANSMISSION DRIVE BELT (FIG. 31)

A. CUTTING OAN REMOVAL (FIG 41)

Fig. 31

1.engine pulley

2.pulley

3.idler pulley

Adjust the tension of the belt with the pulley 3.

MOWER CLUTCH BELT (FIG. 32)

The tension of the belt is automatically adjusted with the spring loaded idler pulley.

Fig. 32

TRANSMISSION DRIVE BELT (FIG 31)

1.engine pulley

2.pulley

3.idler pulley

Adjust the tension of the belt with the pulley 3.

MOWER CLUTCH BELT (FIG 32)

The tension of the belt is automatically adjusted with the spring loaded idler pulley.

MOWER DECK BELT (FIG. 33)

ADJUST THE MOWER COG BELT

NOTE: It is recommended that the mower cog belt be adjusted after 20 hours of operation as the new belts will stretch slightly during the initial break in period.

1.Lower the cutting pan to the lowest position.

2.Pull idler arm assembly in and remove V belt 17x1400 from pulley.

3.Disconnect the spring from the engagement lever.

Fig. 41

4.Disconnect the plug connector from the air valve switch in tunnel.

5.Lift tunnel to release the lower part from the two welded pins that connect it to the mower deck assembly.

6.Pull out tunnel rearwards approximately 10 cm. Secure the tunnel to prevent it from falling back down.

7.Remove the hair pin clips from front pin and from the two rear pins.

NOTE: Altjough it is not necessary, it is recom- mended to loosen the large spring for safety and to facilitate reinstalation of cutting pan.

8.Pull out rear pin from one side and then use a pair of pliers to pull second rear pin from other side.

CAUTION

If the large spring has not been loosened, the pivot arm assembly will not spring up with force. Do not place hands or fingers above the pivot arm assembly and use pliers when pulling out second rear pin.

9.pull out fron pin

10.Remove V-belt from electro magnetic clutch

11.Slide cutting pan out from side of tractor

B. ADJUSTMENT PROCEDURES FOR COG BELT TENSION

1.Remove cutting pan from tractor, follow procedure described in A.

2.Remove V-belt pulley and idler arm assy.

3.Remove plastic belt cover.

4.Loosen the two hex nuts on the cog idler pulley on

English – 19

Page 20 Page 22
Page 21
Image 21
RBH Sound RBH 180 manual Transmission Drive Belt FIG Cutting OAN Removal FIG, Mower Clutch Belt FIG
Page 20 Page 22

RBH 180 specifications

RBH Sound has carved a niche for itself in the world of high-fidelity audio equipment, and one of its standout offerings is the RBH 180 loudspeaker. Designed with meticulous attention to detail, the RBH 180 embodies the brand's commitment to delivering an exceptional listening experience.

One of the main features of the RBH 180 is its advanced driver technology. At the heart of this loudspeaker are dual 8-inch woofers, which offer deep, rich bass response that is both powerful and articulate. Complementing the woofers is a 4-inch midrange driver that provides excellent vocal clarity and detail, making it ideal for both music and film applications. The high-frequency reproduction is handled by a 1-inch soft dome tweeter, which ensures a smooth and extended treble response. Together, these components create a balanced and dynamic sound profile that can fill any room.

Another notable characteristic of the RBH 180 is its elegant cabinet design. Constructed from high-quality MDF, the speaker enclosure is both sturdy and aesthetically pleasing. The cabinet features a brushed aluminum front baffle that not only adds a touch of sophistication but also minimizes resonance, allowing for clearer sound reproduction. The RBH 180 is available in various wood veneer finishes, making it a stylish addition to any home theater or stereo setup.

In terms of connectivity, the RBH 180 is designed for flexibility and convenience. It includes robust binding posts that accommodate a wide range of speaker cables, ensuring a secure and reliable connection to your audio system. The speakers are also compatible with both low-impedance and high-impedance setups, making them versatile enough for different amplification systems.

The RBH 180 loudspeaker employs advanced acoustic engineering to minimize distortion and enhance overall sound quality. The speakers have been carefully tuned to provide an expansive soundstage, allowing for an immersive listening experience. Additionally, the RBH 180 features specialized porting technology that optimizes airflow and further enhances bass performance.

For audiophiles seeking a loudspeaker that combines superior sound quality with stunning design, the RBH 180 stands out as an excellent choice. Whether you're enjoying your favorite music, watching movies, or playing video games, the RBH 180 promises a rich and engaging auditory experience that truly brings content to life. With its impressive features and thoughtful engineering, it continues to solidify RBH Sound's reputation for excellence in the audio industry.
Top Page Image Contents