Mamiya RZ67 Pro II Body Only, RZ67 PRO II manual

Page 27

gently wind the Film Advance Knob until the arrow of the backing paper aligns with the insert Start Mark.

As your gently advance the backing paper, make sure it advances evenly between the spool flanges and does not begin to slant. If it advances unevenly, remove the backing paper from the Take-up Spool and re-insert. Heeding this point will eliminate the possibility of crimping the edge of the film.

Set the correct film speed value on the Film Speed Dial of the Roll Film Holder.

Place the Film Insert into the housing, making sure the film advance coupler of the insert fits into the appropriate hole of the cassette.

After correctly placing the insert into the housing, close the back cover, and while gently holding it in place, push both of the Back Cover Latches as far as they will go.

The Roll Film Holder Housing will accept ei- ther 120 (HA703) or 220 (HB702) Film Inserts.

25

Image 27

Contents Page Congratulations on your purchase A Mamiya RZ67 PRO Contents Mamiya Revolving Back with Automatic Finder Masking Special Features of the Mamiya RZ67 PRORack and Pinion Bellows Focusing Ideal FormatElectronic Interface Bright, Interchangeable Finders Focusing ScreensNew Features Film FlatnessNomenclature and Functions Body Alignment Mark Revolving Ring Battery Chamber CoverContacts for Power Winder Shutter Speed DialRoll Film Holder Waist-Level FinderStart Mark Spool Release PinsFilm Speed Dial Film Spool StudCocking Position Marks Shutter Cocking Pins LensBayonet Ring Page Film type Mamiya RZ67 PRO II SpecificationsInserting the Battery Attaching the Lens Setting the MirrorAttaching / Removing Lenses Attaching LensesRemoving the Lens Using the Waist-Level Finder Raising the Finder Raising the MagnifierLowering the Magnifier Attaching the Finder Folding the FinderRemoving/Attaching the Finder Removing the FinderRemoving a Focusing Screen Interchanging the Focusing ScreenRemoving the Focusing Screen Focusing ScreensReleasing the Shutter R-M Lever Using the Release Button CollarLED Monitor Lamp and Electronic Warning Sounds Operating the Cocking LeverElectronic Warning Sounds LED Monitor Lamps in FinderShutter Speed Dial Shutter Speed and ApertureAttaching the Holder Page Loading the Film Holder Page Film can be advanced in either Two ways Advancing the FilmTaking Photographs Unloading Exposed Film Focusing and Locking the Focusing Knob Focusing Locking the Focusing KnobRefocusing Revolving Back Vertical and Horizontal FormatsChange in Viewfinder Format Depth-of-Field Using the Depth-of-Field ScaleDistance Scale Depth-of-Field Distance ScaleBulb B Exposures Time Exposures Long ExposuresMultiple Exposures Infrared Photography Multiple Exposures Infrared PhotographyMirror Lock-up Operation Flash Photography Using a Tripod Attaching Flash Units Using a TripodDetermining the Aperture Exposure Compensation for Close-up Photography Close-up PhotographyAttaching a Lens with Shutter Released or Mirror Raised Camera Back Lock System Carrying Position How to Use the Carrying StrapAttaching the Strap Removing the StrapWhen the lens can not be removed TroubleshootingWhen the Film Holder can not be removed When the shutter can not be releasedUsing RB Series Lenses and Accessories FocusingShutter Speed Selection Care of the Camera