Installation, Instalación | Audiovox JPA285, JPA260 guide

Installation

Before you begin the installation of your POWER series amp remember, there are two ways to do things – right and twice! Use the proper installation techniques, tools and accessories to insure that your Jensen POWER series amp will put out all the power it was designed to. If necessary, seek a professional installer to have the amplifier installed correctly. Most mobile amp installations do not have the proper gauge wire for power and ground – do not let your amp be a victim of this common installation oversight!

NOTE: This device is a high-power audio amplifier intended for installation in vehicles with a 12-Volt negative ground electrical system. Attempting to connect or operate the amplifier with another type of electrical system may cause damage to the amplifier or the electrical system.

Installation Assistance

For installation assistance, call 1-800-323-4815 during normal business hours, or visit www.jensen.com at any time.

Supplies and Tools Needed

To install the amplifier, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you start.

Supplies

•Black electrical tape

•Amplifier Installation Kit

Tools

•Cordless drill with assortment of bits

•Flat-head and Philips screwdrivers

•Wire cutters/strippers

•Crimping tool

•12-volt test light or digital multimeter

•Wire brush, sandpaper or scraping tool (ground connection to vehicle should be a clean, unpainted metal surface)

Instalación

Antes de iniciar la instalación de la serie de amplificadores POWER recuerde, hay dos maneras de hacer las cosas ¡bien o dos veces! Utilice las técnicas de instalación, herramientas y accesorios adecuados para asegurar que su amplificador Jensen de serie POWER podrá ofrecerle toda la potencia para la que fue diseñado. Si es necesario, busque un instalador profesional para instalar el amplificador correctamente. La mayoría de las instalaciones de amplificadores móviles no tienen un cableado del calibre adecuado para la potencia y la toma a tierra. ¡No permita que su amplificador sea víctima de estos descuidos comunes en una instalación!

NOTA: Este dispositivo es un amplificador de audio de alta potencia diseñado para vehículos con sistema eléctrico con toma a tierra negativo de 12 Voltios. Intentar operar o conectar el amplificador a otro tipo de sistema eléctrico puede causar daños en el amplificador o en el sistema eléctrico.

Asistencia para la Instalación

Para solicitar asistencia para la instalación, llame al 1-800- 323-4815 durante horas laborales, o visite www.jensen.com en cualquier momento.

Herramientas y Materiales Necesarios

Para instalar los amplificadore usted necesitará herramientas, materiales y adaptadores. Es importante contar con todos los elementos necesarios antes de comenzar.

Materiales

•Cinta aislante negra

•Equipo de Instalación del Amplificador

Herramientas

•Taladro sin cable con variedad de puntas y mechas

•Destornilladores planos y destornilladores Philips

•Cortadores de cables y pelacables

•Herramienta para ajustar conectores a presión (crimpar)

•Luz de prueba de 12-volt o multímetro digital

•Cepillo de alambre, papel de lija o herramienta para raspar (la conexión a tierra al vehículo debe ser una superficie metálica sin pintar y limpia)

JPA260/JPA285

Installation

Avant que vous ne commenciez l'installation de votre amplificateur de série POWER rappelez-vous qu'il y a deux façons de faire les choses - la bonne façon et deux fois ! Utilisez les bonnes techniques d'installation, les bons outils et accessoires pour assurer que votre amplificateur série POWER Jensen produit toute la puissance qu'il est conçu pour produire. Si nécessaire, ayez recours à un installateur professionnel pour vous aider avec l'installation correcte de votre amplificateur. La plupart des installations d'amplificateurs mobiles n'ont pas le fil de calibre correct pour puissance et terre - ne laissez pas votre amplificateur devenir un victime de cette négligence commune.

A NOTER : Cet engin est un amplificateur audio de haute puissance conçu pour installation dans des véhicules avec un système électrique de 12V terre négative. Toute tentative de brancher ou d'opérer cet amplificateur dans un système électrique d'un autre type peut nuire à l'amplificateur et au système électrique.

Asistance par l'installation

Si vous devez demander assistance technique par l'installation du amplificateur vous devez téléphoner au numéro 1-800-323-4815 ou vous pouvez visiter le site www.jensen.com.

Materiaux et outillage necessaires

Par installer les amplificateur vous nécessiterez des outils; des matériaux et des adaptateurs. C'est important que vous avez tous les éléments nécessaires avant commencer.

Materiaux

•Ruban isolent noire

•Equipement d'installation du amplificateur

Outillage

•Chignole sans câble à diversité de pointes

•Tournevis plains et tournevis Philips

•Trancheuses de câbles

•Outil par ajuster les connecteurs à pression

•Lumière de preuve de 12 - Volt ou multimètre digital

•Brosse métallique ; papier de verre ou outil pour racler (La connexion à terre du véhicule doit être une surface métallique sans peindre et propre)

JPA260, JPA285 specifications

The Audiovox JPA285 and JPA260 are two innovative portable audio solutions designed for music enthusiasts seeking quality sound and convenient features. Both models reflect Audiovox's commitment to delivering high-performance audio products that blend advanced technology with user-friendly functionality.

The Audiovox JPA285 is particularly known for its powerful sound output and wide frequency response, making it an excellent choice for users who prioritize audio clarity and depth. One of its standout features is the built-in amplification system, which enhances the overall audio experience, enabling users to enjoy their favorite music at higher volumes without distortion. Additionally, the JPA285 is compatible with various media devices, including smartphones, tablets, and laptops, through its Bluetooth connectivity. This seamless pairing allows for wireless streaming, making it easy to play music from multiple sources.

On the other hand, the Audiovox JPA260 offers a more compact design without sacrificing audio quality. This model is ideal for users who require a portable solution that can easily fit into backpacks or carry-on luggage. The JPA260 also boasts Bluetooth connectivity, along with an auxiliary input for connecting non-Bluetooth devices. Its rechargeable battery provides hours of playback time, ensuring that users can enjoy their tunes on the go.

Both the JPA285 and JPA260 feature durable construction, designed to withstand daily wear and tear. This rugged design makes them suitable for various environments, from outdoor gatherings to indoor parties. Moreover, integrated controls on both models facilitate quick adjustments to volume and playback without needing to interact with the connected devices, enhancing user convenience.

In terms of sound performance, both Audiovox models employ proprietary speaker technologies that deliver rich bass and crisp treble. The balanced audio profile allows for an immersive listening experience, whether users are enjoying music, podcasts, or audiobooks.

Overall, the Audiovox JPA285 and JPA260 are exceptional choices for anyone in need of versatile, high-quality portable audio solutions. With their blend of advanced features, user-friendly design, and solid performance, they cater to the diverse needs of today’s audio consumers, making them essential gadgets for music lovers everywhere.