Audiovox operation manual Specifications, Especificaciones, JPA260/JPA285 Spécifications

Page 14

Specifications

CEA Power Ratings

JPA260

Power Output: 60 watts RMS X 2 channels into 4-ohms @ < 1% THD+N

Frequency Response: 10Hz to 100Hz (-3dB)

Signal to Noise Ratio: 100dBA below reference (Reference: 1 watt)

Additional Power Output: 90 watts RMS X 2 channels into 2-ohms @ < 1% THD+N; 180 watts RMS X 1 channel (bridged mono) into 4-ohms @ < 1% THD+N

Dynamic Power: 300 watts x 1 (bridged mono) into 4-ohms @ < 1%THD+N

Dimensions: 280mm X 65mm X 225mm

JPA285

Power Output: 85 watts RMS X 2 channels into 4-ohms @ < 1% THD+N

Frequency Response: 10Hz to 100Hz (-3dB)

Signal to Noise Ratio: 100dBA below reference (Reference: 1 watt, 4-ohms)

Additional Power Output: 125 watts RMS X 2 channels into 2-ohms @ < 1% THD+N; 250 watts RMS X 1 channel (bridged mono) into 4-ohms @ < 1% THD+N

Dynamic Power: 425 watts x 1 (bridged mono) into 4-ohms @ < 1%THD+N

Dimensions: 280mm X 65mm X 330mm

General Specifications

Input Sensitivity: 300mV to 8V for full power output at clipping (1% THD+N)

Bass Boost: 0 to +18dB @ 45Hz, continuously variable

Crossover: 12dB/octave, Butterworth alignment; 45Hz to 250Hz, continuously variable

Reference Supply Voltage for Rated Power: 14.4VDC (+/- 0.2V)

Power Supply: 14.4VDC, (11 to 16VDC allowable), negative ground

Specifications subject to change without notice.

Especificaciones

Grados de Energía de CEA

JPA260

Salida de Energía: 60 vatios RMS X 2 canal a 4-ohmios @ < 1% THD+N

Respuesta de Frecuencia: 10Hz a 100Hz (-3dB)

Señal por Ruido de Radio: 100dBA debajo de referencia. (1 watt, 4-ohms)

Salida de Energía Adicional: 90 vatios RMS X 2 canal a 2- ohmios @ < 1% THD+N; 180 vatios RMS X 1 canal a 4- ohmios @ < 1% THD+N

Energía Dinámicar: 300 vatios X 1 canal a 4-ohmios

Dimensiones: 280mm X 65mm X 225mm

JPA285

Salida de Energía: 85 vatios RMS X 2 canal a 4-ohmios @ < 1% THD+N

Respuesta de Frecuencia: 10Hz a 100Hz (-3dB)

Señal por Ruido de Radio: 100dBA debajo de referencia. (1 watt, 4-ohms)

Salida de Energía Adicional: 125 vatios RMS X 2 canal a 2- ohmios @ < 1% THD+N; 250 vatios RMS X 1 canal a 4- ohmios @ < 1% THD+N

Energía Dinámicar: 425 vatios X 1 canal a 4-ohmios

Dimensiones: 280mm X 65mm X 330mm

Especificaciones Generales

Sensibilidad de la Entrada: 300mV a 8V por salida de los

plenos poderes (1% THD+N)

Alza Baja (Bass Boost): 0 a +18dB @ 45Hz, continuamente variable

Cruce: 12dB/octavo, continuamente variable; 45Hz a 250Hz, Butterworth

Voltaje de Fuente de la Referencia: 14.4VDC (+/- 0.2V)

Fuente de Alimentación: 14.4VDC, (11 to 16VDC permisible), tierra negativa

Las especificaciones están sujetas a cambio sin previo aviso.

JPA260/JPA285

Spécifications

Estimations de puissance de CEA

JPA260

Rendement de puissance : 60 watts RMS X 2 canal dans 4- ohms @ < 1% THD+N

Réponse en fréquence : 10Hz à 100Hz (-3dB)

Rapport signal/bruit : 100dBA au-dessous de la référence (1 watt, 4-ohms)

Rendement de puissance additionne : 90 watts RMS X 2 canal dans 2-ohms @ < 1% THD+N ; 180 watts RMS X 1 canal dans 4-ohms @ < 1% THD+N

Puissance dynamique : 300 watts X 1 canaux dans 4-ohms

Dimensions : 280mm X 65mm X 225mm

JPA285

Rendement de puissance : 85 watts RMS X 2 canal dans 4- ohms @ < 1% THD+N

Réponse en fréquence : 10Hz à 100Hz (-3dB)

Rapport signal/bruit : 100dBA au-dessous de la référence (1 watt, 4-ohms)

Rendement de puissance additionne : 125 watts RMS X 2 canal dans 2-ohms @ < 1% THD+N ; 250 watts RMS X 1 canal dans 4-ohms @ < 1% THD+N

Puissance dynamique : 425 watts X 1 canaux dans 4-ohms

Dimensions : 280mm X 65mm X 330mm

Caractéristiques générales

Sensibilité d'entrée : 300mV à 8V fpour le rendement de plein pouvoir (1% THD+N)

Poussée basse (Bass Boost) : 0 à +18dB @ 45Hz, sans

interruption variable

Cruisement : 12dB/octave, sans interruption variable ; 40Hz à 200Hz, Butterworth

Tension d'alimentation de référence : 14,4VDC (+/- 0,2V)

Exigences de puissance : 14,4VDC, (11 à 16VDC permis)

Ces caractéristiques peuvent être modifiées sans préavis.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents JPA260/JPA285 JPA260/JPA285 Introduction IntroductionIntroducción Dispositifs JPA260/JPA285 FeaturesCaracterísticas Installation Assistance Supplies and Tools Needed InstallationJPA260/JPA285 Installation InstalaciónJPA260/JPA285 Cableado Eléctrico Power Cableado JPA260/JPA285 Wiring CâblagePower Wiring Power Câblage de puissance PowerFusibles de rechange Fuse Replacement Fuses FuseFusibles del Reemplazo Fuse JPA260/JPA285 Wiring Câblage dentrée Input WiringCableado de Entrada JPA260/JPA285 Indicateurs et contrôles Indicators and ControlsIndicadores y Controles Crossover X-OVER Low Pass Filter LPFHigh Pass Filter HPF Filtro de Bajo Paso LPFPreuves TestingPruebas Localisations de problèmes JPA260/JPA285 TroubleshootingLocalización de Problemas JPA260/JPA285 Spécifications SpecificationsEspecificaciones Garantie limitée de 12 mois JPA260/JPA285 Month Limited WarrantyGarantia Limitade de 12 Meses 120 100 200 500 10k 20k JPA285 250 225 200 175 150 125 100 500 10k 20k120 110 100 200 500 10k 20k

JPA260, JPA285 specifications

The Audiovox JPA285 and JPA260 are two innovative portable audio solutions designed for music enthusiasts seeking quality sound and convenient features. Both models reflect Audiovox's commitment to delivering high-performance audio products that blend advanced technology with user-friendly functionality.

The Audiovox JPA285 is particularly known for its powerful sound output and wide frequency response, making it an excellent choice for users who prioritize audio clarity and depth. One of its standout features is the built-in amplification system, which enhances the overall audio experience, enabling users to enjoy their favorite music at higher volumes without distortion. Additionally, the JPA285 is compatible with various media devices, including smartphones, tablets, and laptops, through its Bluetooth connectivity. This seamless pairing allows for wireless streaming, making it easy to play music from multiple sources.

On the other hand, the Audiovox JPA260 offers a more compact design without sacrificing audio quality. This model is ideal for users who require a portable solution that can easily fit into backpacks or carry-on luggage. The JPA260 also boasts Bluetooth connectivity, along with an auxiliary input for connecting non-Bluetooth devices. Its rechargeable battery provides hours of playback time, ensuring that users can enjoy their tunes on the go.

Both the JPA285 and JPA260 feature durable construction, designed to withstand daily wear and tear. This rugged design makes them suitable for various environments, from outdoor gatherings to indoor parties. Moreover, integrated controls on both models facilitate quick adjustments to volume and playback without needing to interact with the connected devices, enhancing user convenience.

In terms of sound performance, both Audiovox models employ proprietary speaker technologies that deliver rich bass and crisp treble. The balanced audio profile allows for an immersive listening experience, whether users are enjoying music, podcasts, or audiobooks.

Overall, the Audiovox JPA285 and JPA260 are exceptional choices for anyone in need of versatile, high-quality portable audio solutions. With their blend of advanced features, user-friendly design, and solid performance, they cater to the diverse needs of today’s audio consumers, making them essential gadgets for music lovers everywhere.
Top Page Image Contents