Speco Technologies HT-INTT5 manual Operating your camera DNR Operating your camera Intensifier

Operating your camera - DNR Operating your camera - INTENSIFIER

6)REDUCE NOISE (Dynamic Noise Reduction) DNR reduces the video noise on the screen.

①Press the SET button to display the SETUP menu and move the arrow to ‘REDUCE NOISE’ using the UP or DOWN button. ② SET ‘REDUCE NOISE’ to the desired mode using the LEFT

or RIGHT button.

▶OFF : Deactivation

▶LOW : Low reduction of the noise

▶MIDDLE : Middle reduction of the noise

▶HIGH : High reduction of the noise

Notes

●If you change the ‘GAIN’ menu from AGC-L to AGC-H, sensitivity is increased as well as noise on the screen.

●When the ‘GAIN’ menu is OFF, REDUCE NOISE will not work.

21

7) INTENSIFIER

Allows you to get clear images under night or low light conditions.

①Press the SET button to display the SETUP menu and move the arrow indicator to ‘INTENSIFIER’ using the UP or DOWN button.

②SET ‘INTENSIFIER’ to the desired mode using the LEFT or RIGHT button.

▶AUTO : When your camera is under night or low lighting conditions select this mode. This mode allows the camera to switch into B/W in low light conditions.

▶OFF : Deactivation

Notes

●If you press “auto” button in the Intensifier mode, you can Control the amount of intensification from 2X ~ X128.

●Increasing the amount of Intensification results in brighter pictures Under low light conditions, and may increase image lag.

●Increasing the amount of intensification may cause image noise which is to be expected as a normal condition..

22