Troubleshooting
If you have trouble operating your camera, refer to the following.
Problem | Solution |
|
|
Nothing appears on | ●Check that the power cord and line are properly |
the screen. | connected. |
| ●Check that you have properly connected the VIDEO |
| cable the camera VIDEO output jack. |
|
|
The image on the | ●Is lens stained with dirt? Clean your lens with soft, |
screen is dim. | clean cloth. |
| ●Is the monitor properly adjusted?. |
| ●If the camera is exposed to strong light |
| change the camera position. |
| ●Adjust the lens’ focus properly. |
|
|
The image on the | ●Adjust the contrast feature of the monitor. |
screen is dark. | ●If you have an intermediate device, set the |
| |
|
|
The camera is not | ●Check that you have properly connected |
working properly, | the camera to an appropriate power source. |
and the surface of |
|
the camera is not. |
|
|
|
MOTION DETECTION | ●Have you set ‘MOTION DET.’ menu to off? |
function is not active. | ●Have you set ‘MD LEVEL’ to low? |
| ●Have you set ‘MD ARAEA’ properly |
|
|
Problem | Solution |
The color of the | ●Check that you have properly set the ‘WHITE |
picture is not | BAL’ menu |
matched. |
|
The image on the | ●Is the camera facing to direct sunlight or |
screen flickers. | fluorescent lighting? Change the camera option. |
|
|
L/L mode isn’t able | ●Have you connected your camera to DC power |
to be selected. | source? Connect it to AC power source. |
|
|
33 |
|
|
|
|
|
| 34 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|