Connections on the Rear Panel, Auto On Switch

Stereo / Bridged	“A” Speakers	Unswitched
Switch		AC Outlet

Line 1	Line 2	Line	Signal Sensing	“B” Speakers
Input	Input	Output	Auto-On	“B” Speakers
			Figure1

Connections on the Rear Panel

Line Input 1 is used to connect a local source such as CD Player, Computer Sound Card, Television Audio Output or other line level source. Line Input 1 has “Priority” over Line Input 2 and will override Line Input 2 whenever signal is present at the inputs marked Line 1.

Line Input 2 is used to connect a signal such as a whole house audio signal as long as it is at line input levels, not speaker level. This can be any source the user wants to have as a primary source.

Line Output 2 is a pass through output of the signal at Line Input 2. Although Line 2 may be overridden by Line 1, its signal is always present at Line Output 2 to be passed on to another zone or location as a line level signal.

Bridging Switch (refer to wiring diagram Figure 2)

In addition to providing 60 watts RMS per channel in the stereo mode, your Amp100 can be used as a high power mono amplifier, providing over 160 watts RMS. This can be accomplished by sliding the mono switch from the stereo position to the bridged position. For mono applications, use only the right channel input.

!Note: Be sure to observe the correct speaker connections for bridged applications. Because of the high power output in this mode, we recommend initially setting the volume control at ‘min’, and then adjusting the volume to the desired level.

Auto On Switch

The Amp100 can be configured to power on automatically, or to have manual control. If you would like the amp to come on automatically when the source begins sending signal, put the auto on switch in the “AUTO” position. When using the amplifier in the “Auto ON” mode the amplifier will automatically shut down after a period of time without signal present. If you would prefer to use the power button on the front of the amplifier, put the auto on switch in the “NORMAL” position.

!Note: If someone switches the amplifier off by using the power button on the front of the amplifier, the auto on feature will not work until the unit is manually switched on again by pressing the power button on the front of the amplifier.

Speaker Terminals

More than one pair of speakers can be used with the Amp100. We have provided two pairs of speaker outputs, labeled SPKR A (left & right) and SPKR B (left & right). The speaker terminals are color coded. Red posts indicate positive (+) terminals and black posts indicate negative (-) terminals. Be sure to connect the positive output terminals of your Amp100 to the positive input terminals of your speakers and the negative output terminals of your Amp100 to the negative input terminals of your speakers.

!Note: Refer to the wiring diagrams on the next page for proper connection of speaker cables.

MONO Source	Figure 2

2 Channel Amplifier With Auto Switching Dual Inputs, AMP 100 specifications

The AudioSource AMP series consists of several high-performance amplifiers designed to enhance audio systems for both commercial and residential applications. Among the notable models are the AMP 110, AMP 102, AMP 100, AMP 310, and AMP 210, each offering unique features and technologies tailored to different needs.

Starting with the AudioSource AMP 110, this compact yet powerful amplifier delivers 100 watts per channel at 8 ohms, making it suitable for driving a variety of speakers. Its high-efficiency design ensures minimal heat generation, which enhances longevity and reliability. Key features include RCA and 1/4" TRS inputs for versatile connectivity, as well as a front-mounted volume control for user convenience. The AMP 110 is perfect for anyone seeking a simple and effective solution for powering a stereo system or home theater.

Next, the AMP 102 provides two channels of high-quality audio amplification with a total output of 50 watts per channel at 8 ohms. It is ideal for smaller rooms where space is a consideration. The AMP 102 features a compact and lightweight design, making installation easy. Its built-in protection circuitry ensures safe operation while maintaining superb sound clarity, making it an excellent choice for background music systems or standalone setups.

The AMP 100 stands out with its versatility, offering both 100 watts per channel and a bridge mode option that can double output for greater power demands. It also includes detachable power cords and RCA inputs, ensuring seamless integration into existing systems. This model is equipped with a unique low-frequency roll-off switch, allowing users to tailor their sound experience, making it ideal for subwoofer applications.

For users requiring more channels, the AMP 310 is a robust 3-channel amplifier that delivers 100 watts per channel. Equipped with a sophisticated thermal protection system and short circuit protection, this model is built to handle extended use without compromise. The AMP 310 excels in multi-room audio setups, providing rich sound that fills large spaces.

Lastly, the AudioSource AMP 210 amplifies the experience with its 2-channel configuration, offering 70 watts per channel at 8 ohms. This model includes variable speed fans for temperature management, ensuring reliability during high-demand scenarios. It also boasts a variety of input options, including RCA and speaker-level inputs, making it a flexible option for diverse audio applications.

In summary, the AudioSource AMP series offers a range of amplifiers designed for various requirements, from compact and efficient models to powerful multi-channel solutions. Each model is equipped with features that enhance performance and usability, making the series suitable for both casual listeners and audiophiles alike.