5. | Large square of monotonous object, like a wall; |
|
6. | The object is too dark or vague; |
|
7. | The targeted picture is too small |
|
3. 3. Surveillance function |
| |
a) Set & Transfer the preset points |
| |
The function of preset positions is, temporarily storing such |
| |
location | parameters as horizontal angle / inclination / lens’ focus in | a mem |
ory and transferring them whenever they’re needed. User |
| |
can quickly transfer the preset positions via the keyboard, remote | or some | |
thing else such as PC software. The speed dome |
| |
supports 127 preset points. |
|
b)Automatic Cruise
Automatic Cruise is an internal set function, which inserts the |
|
| |
points and sets up the automatic cruise among preset positions by | program | ||
ming them beforehand in the cruise lists. The cruise order | and pausing timi | ||
ng can be programmed and one cruise route can | store 8 points and time | ||
s. |
|
|
|
c)Auto Scanning
Cameras can level | scan back and forth among the left & right | limits at |
the set speed via | the keyboard and menu settings using | the left and righ |
t limits setup beforehand. |
|
d)Power-off Protection
When a planned or unplanned |
|
will automatically preserve the movement state before the |
|
the previ | |
ous stored movement. |
|
Part 3 Extended Function |
|
This section describes the extended function and common principles | of the a |
ll in one intelligent dome camera. Different systematical |
|
platforms have different methods. In some cases, special |
|
requirements & operational methods could exist, subject to |
|
systematical manufacturer’s manual. |
|
1. 1. Set the scanning |
|
| The speed dome can be set in two fixed locations and scan back | and fort | ||||||||
| h at the set speed. Set #126 for linear | scanning. Set #xxx | preset position, | |||||||
| xxx is the | scanning speed | that, move the rod, the | |||||||
| image would move to the beginning | locations. Set #127 as scanning | ||||||||
| beginning location, moves the | image to the ending location and set #1 | ||||||||
| 28 as the ending scan | location. |
|
|
|
| ||||
| Example 1 Scan setting at the speed of 1s around. |
|
|
| ||||||
| Setting Method |
|
|
|
|
| ||||
|
|
| 1. | Set #126 preset position. |
|
|
|
| ||
|
|
| 2. | Set #30 as speed index. |
|
|
|
| ||
|
|
| 3. | Move the rod and adjust the image as the scanning one. |
|
| ||||
|
|
| 4. | Set #127 as the beginning location. |
|
|
| |||
|
|
| 5. | Move the rod and adjust the image to the scanning ending location. | ||||||
|
|
| 6. | Set #128 as the ending location |
|
|
|
| ||
|
|
|
| : | Scan setting at the speed of 50s around. |
|
|
| ||
| Example 2 |
|
|
| ||||||
|
|
|
|
| : |
|
|
|
|
|
| Setting Method |
|
|
|
|
| ||||
|
|
| 7. | Set #126 preset position. |
|
|
|
| ||
|
|
| 8. | Set #50 as speed index. |
|
|
|
| ||
|
|
| 9. | Move the rod and adjust the image as the scanning one. |
|
| ||||
|
|
| 10. Set #127 as the beginning location. |
|
|
| ||||
|
|
| 11. | Move the rod |
|
|
|
|
| |
|
|
| 12. Set #128 as the ending location |
|
|
|
| |||
2. |
|
|
| : |
|
|
|
|
|
|
| Transfer the cruise group |
|
|
|
| |||||
| Transfer |
| : |
|
|
|
| For ex | ||
| ||||||||||
| ample Start #1 cruise group. |
|
|
|
|
| ||||
| Method: Transfer #101 preset position. |
|
|
|
| |||||
3. | Start the linear scanning |
|
|
|
|
| ||||
|
|
| Transfer | #128 preset position. |
|
|
|
| ||
4. |
|
| Start |
|
|
|
|
| ||
| Transfer #125 preset position or press |
|
| |||||||
| 36 |
|
| |||||||
|
|
| : |
| Part 4 Appendix |
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
1. | 1. Clearing of fault |
|
|
|
|
| ||||
|
| 0° |
|
|
|
|
|
|
|
|