Philips SPC225NC, SPC220NC user manual Connecting the WebCam to your PC / laptop

Page 10

ENInstallation

Connecting the WebCam to your PC / laptop

General

1Be sure to run the installation CD first, before connecting the WebCam to the PC / laptop.

2Turn on the PC / laptop.

3Connect the USB connector of the USB cable to the USB port of the PC / laptop.

> The WebCam will now derive its power from the PC / laptop.

4Aim the webcam as required.

5 Push the USB cable into the cable management slot.

6 Use the clamp and the two rubber rims to attach the WebCam to your PC monitor or laptop screen.

 

 

SPC220NC WebCam

6

 

6

5

5

 

 

 

3

7

8

 

3

7Peel off the protective foil on the rear of the microphone (SPC220NC only) and attach the microphone to the PC monitor or laptop screen.

8Connect the microphone plug to the microphone or green socket of the sound card.

10

Image 10
Contents SPC220NC SPC225NC Page Including manual What’s in the box?Microphone WebCamHeadset SPC225NC only with Audio cable SPC225NC onlyContents ENWelcome Copyright Safety precautionsThings you should know Do not use your WebCam in the waterSelect your language Installation continues automatically ENInstallationInstalling the WebCam software ‘Manual’ screen appears’Reboot’ screen appears InstallationFollowing software license agreement appears Connecting the WebCam to your PC / laptop WebCam will now derive its power from the PC / laptopSPC225NC WebCam General settings WebCam settingsFlickerless Picture settings Frame rateAuto Exposure & Exposure slider BrightnessMirror Operating the WebCam WebCam Video ViewerSelect ‘Record’ Select a folder to store the recording Output size resolutionInstant messaging and Internet calling Recording starts immediatelyTechnical specifications FCC compliance Important informationDisclaimer This device may not cause harmful interference,System requirements Disclaimer of warrantyEnvironmental information Limitations of damages