Installation
EN
Or:
Select the second option if you wish to continue installation.
Click ‘Next’ to continue.
>The ‘Installation’ screen appears. The items that can be installed are shown on the left side of the screen. An explanation of each item is given on the right side.
All items are already selected for installation.
5Click the 'Next' button if you wish to install all items.
Or:
If there are certain items you do not wish to install, check the boxes before these items.
Select at least ‘SPC220NC WebCam Driver’ and ‘WebCam Video Viewer’ for SPC220NC WebCam as well as for SPC225NC WebCam (software is the same for both WebCams). Click the 'Next' button.
> The following software license agreement appears.
6Click on 'Yes' to continue the installation.
>The following screen appears when the installation was successful.
7Select the user manual.
Or:
Click 'Next' to continue.
>The ’Reboot’ screen appears.
8Select ‘Yes’ to restart your PC / laptop, then click ‘Finish’.
>The WebCam Video Viewer desktop shortcut 
will be installed after installation.
>Via the WebCam Video Viewer you have access to all camera- related software. See ‘Operating the WebCam’.
9You can now connect your WebCam.
9