SET ;
MENU ;
TFU :
:
SET ;
MENU ;
When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time.
1. Press the SET button, and set the camera mode to
[ ] or [ ]; or press the 7 button.
2. Press the MENU button. 3. Select the [Setup] at the end of the Menu with the
c / d buttons, and press the SET button. 4. Select [Date/Time] with the c / d buttons, and
press the SET button. 5. Select the date format with the c / d buttons, and
press the SET button.
Select the item’s field with the e / f buttons and adjust the value for the date and time with
the c / d buttons. The time is displayed in 24-hour format.
After confirming all settings are correct, press
the SET button. 6. To exit from the [Setup] menu, press the MENU
button.
Initial Settings
The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an extended period of time.
1. Press the ON/OFF button to turn the power on.
2. Press any button to enter language setup. Select the displayed language with the e / f / c / d buttons and press the SET button.
3. Select the date format with the c / d buttons, and press the SET button.
4. Select the item’s field with the e / f buttons and adjust the value for the date and time with the c / d buttons.
5. After confirming all settings are correct, press the SET button.
Half press the shutter button or press the MENU button will enter capture mode without saving the settings.
Setting the Date and Time