Sanyo VPC-S1415 manual Protecting Images, Canceling the Protection, EN-28

Protecting Images

Set the data to read-only to prevent images from being erased by mistake.

1. Press the 7 button.

„ The last image appears on the screen. 2. Select the image that you want to protect with the

e/ f buttons.

3.	Press the MENU button.
4.	Select [Protect] with the c / d buttons, and press
	the SET button.
5.	Select [Single] or [All] with the e / f buttons, and	MENU ;	SET ;
	press SET button.
6.	Select [Set] with the e / f buttons, and press the
	SET button.

„Protection is applied to the image and the camera returns to the playback mode.

„The protect icon [ ] is displayed with protected images.

When [All] has been selected, [ ] is displayed
with all the images.	MENU ;	SET ;

Canceling the Protection

To cancel protection for only one image, display the image on which you want to remove the image

protection. MENU ; SET ;

1.Press the 7 button.

„The last image appears on the screen.

2.Select the image that you want to cancel protection with the e / f buttons.

3.Press the MENU button.

4.Select [Protect] with the c / d buttons, and press the SET button.

5.Select [Single] or [All] with the e / f buttons, and press the SET button.

6.Select [Cancel Protect] with the e / f buttons, and press the SET button.

„The removal of image protection is executed and the camera returns to the playback mode.

„Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of their protected status.

EN-28