3. If you select [Single] in the previous step, the figure shown on the right hand side will appear.
Select the image that you want to print with the e / f buttons.
Select the print number (up to 99) with the c /
dbuttons.
After selecting the desired image and printing |
|
|
number, press the SET button to confirm. | ; | ; |
4. Select [Exit] with the c / d buttons, and press the SET button.
; 
5. Select [Print] with the c / d buttons, and press the SET button to start printing.
; 
6.The printing starts and the figure shown on the right hand side appears.
[COMPLETE] will be displayed temporarily, reminding you that the printing procedure is
finished.
If an error is detected during the connection (i.e. a printer hardware problem) between camera and printer, [PRINT ERROR] will be displayed.
If an error is detected during the
communication (i.e. wrong setting on the camera) between camera and printer, [ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.