Turning the Power On and Off
There are two ways to turn on the camera:
•The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends and the camera is turned on in Record mode.
•The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the Power button.
See "Modes" on page 17 to know more about Record and Playback mode.
Please remove the lens cover before doing Power on.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First is the setup of language menu. Specify in which language menus and messages are to be displayed on the LCD monitor.
Setting the Language
1.Press , , or to move through the selection.
2.Select a language, and then press OK to apply.
Setting the Date & Time
1.Press or to move through the selection.
2.Press or keys to change the value for the date and time.
3.Press OK to apply.
4.If necessary, press to close the menu.
Now, you are ready to start taking images and videos.
Holding down or keys to change the values continuously.
Modes
Your camera has three modes:
Record Mode
This is the default mode while you turn on the camera every time. You are able to take images and record audio clips in this mode.
Playback mode
Press the Playback button after the camera is turned on to view and edit captured images or playback videos and audio clips. The recording of voice memo attached to images is available in this mode.
Movie mode
Press the Movie button after the camera is start/stop recording video in this mode.
17