Sanyo VPC-E2100 Setting Date & Time, Setting Language, Setting File Numbering, Setting TV Out

Setting Date & Time

Use the Date & Time function to set the date and time of your camera. This function is useful in attaching date stamps on captured images. Your camera uses a 24-hour time format.

1.Press the navigation controls to adjust date and time value. By holding down the or keys, the numeric values changes continuously.

2.Press the OK button to apply changes.

Setting Language

Specify in which language menus and messages are to be displayed on the LCD monitor.

1.Use the navigation control to scroll through the list and select the desired language.

2.Press the OK button to confirm and apply settings.

Setting File Numbering

This function allows you to select the method in which to assign file numbers to images.

Available settings are:

•Series. Assigns number to files in sequence even if the folder is changed.

•Reset. The file numbering will start from 0001 each time the folder is changed and "Format" is processed.

To understand folder and file structure of your camera, see "About Folder and File Names" on page 64.

Setting TV Out

Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV out is not set correctly, the image may not display properly on TV.

Available settings are:

•NTSC. Applicable in Japan, USA, Canada, Taiwan and others.

•PAL. Applicable in Europe, Asia (excluding Taiwan), Oceania and others.

58