Sanyo VPC-E2100 Setting the Drive Mode, Setting the AF Area, To set the Drive Mode, 41

Setting the Drive Mode

Your camera features a Self-timer and Burst which can be set in the Drive mode function in the Record Menu. The Self-timer allows you to take images after a pre-defined delay. While burst lets you take consecutive shots. This function is only available in recording still images. The Drive mode setting is automatically set to off when you turn off the camera.

To set the Drive Mode

1.From the Record menu, select Drive Mode.

2.Use the or keys to go through the selection.

3.Press the OK button to save and apply changes.

The table below shows the available Drive mode settings.

Icon	Item	Description
	Off	Captures an image without time delay.
	10 Sec.	Sets a 10-second delay to capture image after pressing the Shutter button.
	2 Sec.	Sets a 2-second delay to capture image after pressing the Shutter button.
		Performs delay and capture twice:
	Double	• Performs a 10-second delay, then captures the image.
		• Performs another 2-second delay then captures the image again.

Setting the AF Area

AF stands for Automatic Focus. This feature determines the area on which the camera focuses.

To set AF Area

1.From the Record menu, select AF Area.

2.Use the or keys to go through the selection.

3.Press the OK button to save and apply changes.

The table below shows the available AF area settings.

Icon

Item

Description

Wide

The camera automatically selects focus area within the wide frame.

Center

The focus area is fixed on the center.

41