Using Flash
When taking pictures in difficult lighting conditions, use the Flash/Right button to get correct exposure. This function cannot be activated in recording videos or continuous shooting.
To activate Flash:
•Press the Flash/Right button on your camera repeatedly until your desired flash mode is displayed on the LCD monitor.
Your camera is equipped with five flash modes:
Auto. The flash fires automatically whenever extra lighting is needed.
Forced on. The flash fires whenever you press the Shutter button regardless of lighting conditions.
Slow sync. The flash fires with a slow shutter speed.
Forced off. The flash is turned off.
Flash/Right button
Auto flash is enabled
•Flash function is only available in shooting still images but not available in Burst, Speedy Burst and AEB modes.
•Do not charge the flash while spinning the Zoom lever. Charge the flash after releasing the zoom lever if necessary.
Setting the Focus Mode
This function allows users to define the type focus when recording a still image or a video clip.
To set the Focus mode
•Press the Macro/Left button repeatedly until the desired focus mode icon is displayed on the lower left corner of the LCD monitor.
Macro/Left button
Your camera supports the four focus modes:
Normal. With normal focus, the focus range starts from 0.10m. When the camera is set to Normal mode, there is no icon displayed on the screen.
Macro. This mode is designed for
Pan Focus. The focus of this mode is in the maximum
Depth of Field (DOF), not designing for
Focus enabled
Infinity. When Infinity is set, the camera focuses on distant objects.