Ricoh RDC-i500 manual For Macintosh

Page 24

For Macintosh

You can connect the camera to a Macintosh using the USB cable supplied with the camera.

A Open the terminal cover on the leftside of the camera.

B Insert the smaller connector on one end of the USB cable supplied into the DIGITAL (USB) terminal of the camera.

C Insert the connector on the other end of the cable into the USB port of the PC.

D Turn the camera on.

The PC will automatically detect the equipment which has been connected and operate accordingly. If a message is displayed, follow the instructions on the screen.

Connection by USB cable is completed.

Before disconnecting the USB cable, perform the following steps

Check that data transmission is not performed between a camera and a PC. Turn off the camera.

Disconnect the USB cable.

22

Image 24
Contents Connecting to a Personal Computer Introduction Read This Before Proceeding Simple Operation GuideContents Changing the Camera Settings Recording Images with the CameraUsing JOB Navi. Func. Image Capture Guide List Direct Upload SettingsUsing the Extension Functions Setting the Receiving PC for Direct UploadAppendix Page Chapter Getting Started What You Can Do Using a PC Using the Camera Control Functions from the BrowserUsing the JOB Navi. Func. Image Capture Guide List Tool Kit Using the RDC-i Explorer Plug-In / RDC-i Mounter Using the Twain FunctionSetting the PC for Direct Upload PC Environment For a PC running WindowsFor Macintosh Connecting Methods Connecting the Camera to the USB PortConnecting the Camera to a Network Installing the USB Driver For WindowsFor Macintosh Installing the Application Software Installing RDC-i SoftwareInstalling QuickTime Installing JOB Navi. Func. Image Capture Guide List Tool KitInstalling the RDC-i Mounter Installing the RDC-i Twain DriverInstalling QuickTime Installing RDC-i Direct upload Connecting the Camera to the USB Port Connecting the Camera by USB Cable For WindowsSeconds when For Macintosh Connecting the Camera to a Network RequirementsConnecting Procedure Making the Camera Settings COM Port Settings for Windows 98/ME