Ricoh RDC-i500 manual Using the RDC-i Explorer Plug-In / RDC-i Mounter, Using the Twain Function

See • To use the Image Capture Guide List Tool Kit, after installing the software and connecting the camera according to the instructions in the latter half of this chapter, refer to Chapter 5 “Using JOB Navi. Func. Image Capture Guide List”.

■Using the RDC-i Explorer Plug-In / RDC-i Mounter

The RDC-i Explorer Plug-In (Windows) / RDC-i Mounter (Macintosh) are extended functions for copying images stored in the camera onto the hard disk of the PC, or copying image files or setting files created on the PC in the camera.

Function such as making a backup file of all the camera settings on the PC is also available.

See • To use the RDC-i Explorer Plug-In / RDC-i Mounter functions, after installing the software and connecting the camera according to the instructions in the latter half of this chapter, refer to Chapter 6 “Using the Extension Functions”.

■Using the TWAIN Function

If you install a TWAIN driver for this camera, you can call up the images recorded in the camera’s storage memory (internal memory or CF card) directly from the graphic application software compatible with TWAIN onto the screen.

See • To use the TWAIN function, after installing the software and connecting the camera according to the instructions in the latter half of this chapter, refer to Chapter 6 “Using the Extension Functions”.

■Setting the PC for Direct Upload

To use the [DIRECT UPLOAD] function to send images directly to a specific PC from outside the company, the PC must be set to receive the images. This manual explains the settings to be made.

See • To set the receiving PC, after installing the software and connecting the camera according to the instructions in the latter half of this chapter, refer to Chapter 7 “Setting the Receiving PC for Direct Upload”.

1

Getting Started

9