Linn AKURATE Loudspeaker System owner manual English Akurate

English AKURATE 221

Description and available settings for parameters

Default settings are shown in grey.

PARAMETER	SYMBOL	0	1	2	3	4	5	6	7	8	9
External high pass
frequency*
Increasing the setting			10	50	75	100	115	135	160	190	235
reduces the bass
content sent to the
external speakers. (Hz)
Internal high pass
frequency
Increasing the setting			18	22	25	30	34	40
raises the lowest
frequency produced
by the unit. (Hz)
Internal low pass						NO
frequency**						FILTERING
Reducing the setting			55	85	130
lowers the highest
frequency produced by
the unit. (Hz)

*Only for use when the AKURATE 221 speaker is connected to a power amplifier (see Connecting section in this chapter).

** If you are using the AKURATE 221 speaker with a Linn System Controller or other AV processor, set to 4 (No filtering).

PARAMETER

Coarse gain Every one step increase in the setting raises the gain (volume) of the speaker by

5 decibels. Every one step decrease in the setting lowers the gain (volume) of the speaker by

5 decibels. (dB)

Fine gain Every one step increase in the setting raises the gain (volume) of the loudspeaker by

1 decibel. (dB)

Bass equalisation Every one step increase in the setting applies an additional 3 dBs at 30 Hz and below. (dB@30 Hz)

Time out

Length of time before unit will go into standby after audio input ceases. (mins)

SYMBOL 0 1 2 3 4 5 6 7 8 9

-15 -10 -5 0 +5 +10 +15

0 +1 +2 +3 +4

0 +3 +6

ALWAYSON 5 10 20

AKURATE Loudspeaker System

Owner’s Manual 12