A IN
Connecting to a stereo pre-amplifier if used with large (full-range frequency response) speakers, for example AKURATE 242 or 212 speakers.
HP OUT
AL OUT
A IN
FROM STEREO PRE-AMP
AKURATE Loudspeaker System
Owner’s Manual
AL OUT
FROM LINN SYSTEM CONTROLLER
OR OTHER AV PROCESSOR
Connecting
Connect the AKURATE 221 speaker to a mains supply using the mains lead provided.
IMPORTANT:
Do not turn on the mains supply until you have connected all other components.
Connecting to a Linn System Controller or other AV processor
HP OUT
English
AKURATE 221
Connecting to a stereo
with ‘small’ (limited bass response) speakers.
TO POWER AMPLIFIER
HP OUTAL OUT
A IN
FROM STEREO PRE-AMP
Note:
In the above configuration the AKURATE 221 speaker is being used to stop low bass notes from being sent to the main speakers.
Connecting to another AKURATE 221 speaker
AKURATE 221 - ONE | AKURATE 221 - ONE |
HP OUT
HP OUT
AL OUT
A IN
| FROM LINN SYSTEM | OR |
| CONTROLLER | |
|
| |
| OR OTHER |
|
AKURATE 221 - TWO | AV PROCESSOR |
|
| AL OUT |
|
FROM | A IN | FROM |
| ||
STEREO |
| STEREO |
|
|
AKURATE 221 - TWO
HP OUT
HP OUT
AL OUT
AL OUT
A IN
A IN
10
