Linn AKURATE Loudspeaker System Single-wiring, Tri-wiringor tri-amping, Bi-wiringor bi-amping

AKURATE 242, 225 and 212 English

Single-wiring Tri-wiring or tri-amping

Position of link strips if single-wiring (i.e. using a single pair of cables from one stereo power amplifier).

Suggested position of link strips if tri-wiring (i.e. using three pairs of cables from one power amplifier) or tri-amping (i.e. using one pair of cables from each of three power amplifier channels).

SUPER TWEETER

TWEETER	Output from
ACTIVE	power amplifier
MID	can be
UPPER BASS	connected to
BASS	any of the five
LOWER	terminals.
BASS BOOST

AKURATE 242 and 225

		Output from
		power amplifier
BASSMID TWEETER SUPER TWEETER	ACTIVE	can be
		connected to
		any of the four
		terminals.

AKURATE 212

TWEETERSUPER TWEETER

ACTIVE

MID

BASS BOOSTLOWER BASSUPPER BASS

Output from power amplifier can be connected to either of the two terminals.

Output from power amplifier can be connected to either of the two terminals.

		Output from
		power amplifier
BASSMID TWEETER SUPER TWEETER		can be
		connected to
	ACTIVE
		either of the
		two terminals.

AKURATE 242 and 225

AKURATE 212

Bi-wiring or bi-amping

Suggested position of link strips if bi-wiring (i.e. using two pairs of cables from one power amplifier) or bi-amping (i.e. using one pair of cables from each of two power amplifier channels).

Important notes on using the link strips

The above configurations are only suggestions; many others are possible. If you are trying other setups please bear in mind the following points.

	Output from
	power amplifier
	can be
SUPER TWEETER	connected to
	any of the three
TWEETER	terminals.
ACTIVE
MID
UPPERBASS	Output from
BASS	power amplifier
LOWER	can be
BASS BOOST	connected to
	either of the
	two terminals.

AKURATE 242 and 225

		Output from
		power amplifier
		can be
BASSMID TWEETER SUPER TWEETER		connected to
	ACTIVE
		any of the three
		terminals.

AKURATE 212

●Never use the strips to link positive (+) and minus (-) terminals together.

●Don’t connect more than one strip per terminal.

●Bass quality will be impaired if you link LOWER BASS and BASS BOOST together or UPPER BASS, LOWER BASS and BASS BOOST together.

Quad-amping and beyond

Improved audio quality can be obtained by connecting separate power amplifiers to each pair of speaker terminals (bar the BASS BOOST terminals, see next page). However, for the best audio performance your AV/hi-fi system should be converted from running passively to running actively (see AKTIV operation section).

AKURATE Loudspeaker System

7 Owner’s Manual