Sanyo VDC-HD3100/HD3100P Before You Begin Network Operation 2/13, Monitor live video

Page 27

Follow the steps below to prepare your computer for network operation. For detailed procedure, refer to the linked information.

1 Assign a unique IP address to each camera.

If you have newly installed two or more cameras on your network, you can accomplish this by using the supplied “Auto IP Setup” software.

2 Check your operating environment

3 Connect the camera to the network to which your PC is also connected.

4 Configue the network information on your PC

You need to configure information such as the IP address of your PC.

5 Install the “H.264 Plug-in” from the supplied CD-ROM onto your PC.

Double-click the “setup.exe” icon and complete the steps in the wizard.

You are now ready to monitor the surveillance video in the H.264 format.

6 Access the camera from your Web browser.

From your Web browser (Internet Explorer), access the camera and log into the system as an “admin” user (administrator).

7 Monitor live video.

When you access the camera and log into the system, live video from the camera appears on the live screen.

If the live screen displays no or distorted video, check your operating environment and connection conditions.

8 Configure the necessary settings on the administrator configuration screens.

Although the camera is already configured with the factory default settings so that you can monitor live video immediately after you log into the system, you need to configure necessary settings according to your installation environment and application of the camera.

If this is the first access to the camera, start by configuring the system clock on the CLOCK SETTINGS screen.

9 Use associated software applications to extend the capabilities of your surveillance system.

Install the following associated software applications on your PC, as required:

VA-SW3050Lite (supplied): Monitor application for monitoring video images from more than one camera simultaneously on a multi-view screen.

VA-SW3050Server/Client (optional): Recorder/player application for recording and playing back streaming video data from the network.

Before You Begin Network Operation 2/13

Image 27

Contents Introduction1/15 VDC-HD3300/HD300P VDC-HD3100/HD3100PIntroduction 2/15 HV/OFF Introduction 3/15Introduction 4/15 Introduction 5/15 Introduction 6/15 ASSIST/IRIS SettingsIntroduction 7/15 Introduction 8/15 Alarm Input Terminal ConnectionIntroduction 9/15 Alarm Output Terminal ConnectionConnection to 24 VAC power supply Connection to 12 VDC power supplyUsing PoE Introduction 10/15About the internet connection Introduction 11/15 Press the SET button for 2 seconds or more Introduction 12/15Introduction 13/15 Adjusting focusIntroduction 14/15 Press the NEAR/FAR button to adjust the iris levelIntroduction 15/15 Quick Operation Guide1/10 Turn on the camera Connect the power cable to the power terminalsConnect the network LAN socket to your PC using a LAN cable Quick Operation Guide 2/10Quick Operation Guide 3/10 Access the camera from your PCs Web browserQuick Operation Guide 4/10 Detect Quick Operation Guide 5/10Quick Operation Guide 6/10 Quick Operation Guide 7/10 Quick Operation Guide 8/10 Quick Operation Guide 9/10 Quick Operation Guide 10/10 Optional ConfigurationBefore You Begin Network Operation1/13 Monitor live video Access the camera from your Web browserBefore You Begin Network Operation 2/13 Assign a unique IP address to each cameraStatus Before You Begin Network Operation 3/13Click Auto IP Setup Before You Begin Network Operation 4/13Insert the supplied CD-ROM into the CD-ROM drive of your PC Select the desired camera and click Manual setting Before You Begin Network Operation 5/13Make changes to the camera data and click Execute Before You Begin Network Operation 6/13 Before You Begin Network Operation 7/13 Control Panel, click Network and Internet ConnectionsClick Network Connections Click Properties Before You Begin Network Operation 8/13Control Panel, click Network and Sharing Center Before You Begin Network Operation 9/13Select the Internet Protocol Version 4 TCP/IPv4 check box Before You Begin Network Operation 10/13Click Manage network connections Double-click Local Area ConnectionBefore You Begin Network Operation 11/13 Before You Begin Network Operation 12/13 Disabling authentication check at loginBefore You Begin Network Operation 13/13 Working with Live Screen1/10 Type your user name and password and click OK Working with Live Screen 2/10Start Internet Explorer Working with Live Screen 3/10 Working with Live Screen 4/10 Working with Live Screen 5/10 Working with Live Screen 6/10 Menu Selection ButtonsOther Buttons Size Working with Live Screen 7/10Working with Live Screen 8/10 Working with Live Screen 9/10 Click the Capture button on the tool panelClick Close Automatic Stop Starting alarm signal outputStopping alarm signal output Working with Live Screen 10/10VDC-HD3300/HD300P VDC-HD3100/HD3100P Working with Administrator Configuration Screens1/50Working with Administrator Configuration Screens 2/50 Working with Administrator Configuration Screens 3/50 IP ADDRESS, select DhcpDDNS, select on Working with Administrator Configuration Screens 4/50 Http PORT, type your Http port number Working with Administrator Configuration Screens 5/50Working with Administrator Configuration Screens 6/50 Working with Administrator Configuration Screens 7/50 TITLE, type the desired camera title and click SETClock DISPLAY, select the clock display style Working with Administrator Configuration Screens 8/50 Working with Administrator Configuration Screens 9/50 Working with Administrator Configuration Screens 10/50 Anonymous User LOG IN, select on and click SET Working with Administrator Configuration Screens 11/50Working with Administrator Configuration Screens 12/50 Configure the resolution ResolutionConfigure the image quality Picture Quality Frame RATE, select the frame rate of the stream Working with Administrator Configuration Screens 13/50When your selection in Priority is Quality Picture Quality When your selection in Priority is Bitrate BitrateWorking with Administrator Configuration Screens 14/50 Configuration Summary for Each Sub Menu Item Working with Administrator Configuration Screens 15/50Sense UP, select the electronic sensitivity boosting power Working with Administrator Configuration Screens 16/50Configuring Monitoring Conditions Switching between Monitoring ConditionsMASKING, select on and click SET Working with Administrator Configuration Screens 17/50Working with Administrator Configuration Screens 18/50 Click SET and then BackWhite BALANCE, select AWC Working with Administrator Configuration Screens 19/50 Working with Administrator Configuration Screens 20/50 BLC, select Center and click SETResize the center metering area Working with Administrator Configuration Screens 21/50 Click SET and then BackBLC, select Masking and click SET Working with Administrator Configuration Screens 22/50 Working with Administrator Configuration Screens 23/50 Working with Administrator Configuration Screens 24/50 Working with Administrator Configuration Screens 25/50 Manually Configuring Mode-Switching Luminance Level ADJDAY/NIGHT, select Auto Working with Administrator Configuration Screens 26/50 Fixing Camera to Color Video ModeFixing Camera to Black-and-White Video Mode Working with Administrator Configuration Screens 27/50 Vivid Color EFFECT, select on and click SETGAMMA, select the gamma correction level and click SET Working with Administrator Configuration Screens 28/50 DNR, select on and click SETSelect the Manual check box Click Privacy Mask in the sub menu Working with Administrator Configuration Screens 29/50MIRROR, select the desired mirror mode and click SET Click ONE Push to focus on the subjectWorking with Administrator Configuration Screens 30/50 Select the Setting Items check boxCOLOR, select the color of the mask patterns Working with Administrator Configuration Screens 31/50 Working with Administrator Configuration Screens 32/50 Working with Administrator Configuration Screens 33/50 Working with Administrator Configuration Screens 34/50 SENSITIVITY, select the detection sensitivityChecking how the motion sensor works Working with Administrator Configuration Screens 35/50 Working with Administrator Configuration Screens 36/50 Alarm Working with Administrator Configuration Screens 37/50Alarm OUT1, select Remote Working with Administrator Configuration Screens 38/50Configure your e-mail server Working with Administrator Configuration Screens 39/50To send a test e-mail, click Test Working with Administrator Configuration Screens 40/50AUTHENTICATION, select the authentication method Mail ADDRESS, type the recipient e-mail addressesIf you selected Interval Working with Administrator Configuration Screens 41/50TRIGGER, select the e-mail transmission conditions If you selected Network FailureWorking with Administrator Configuration Screens 42/50 SUBJECT, type the subject title of the e-mailTEXT, type the message text and click SET To use the passive FTP mode, in FTP PASSIVE, select USE Working with Administrator Configuration Screens 43/50To use a temporary file, set Temporary File to USE Working with Administrator Configuration Screens 44/50If you selected Alarm IN1/2, MOTION, or Alarm OUT1/2 Working with Administrator Configuration Screens 45/50Working with Administrator Configuration Screens 46/50 Working with Administrator Configuration Screens 47/50 Working with Administrator Configuration Screens 48/50 Select the firmware updater fileClick SET Working with Administrator Configuration Screens 49/50 Access LOG Working with Administrator Configuration Screens 50/50A1/10 2/10 Cannot access the cameraCamera has been suddenly disconnected 3/10Buttons on the control panel/tool panel do not respond 4/10Cannot set Shutter to Short or Long 5/10Cannot display Live video 6/10Video image is distorted and cannot be displayed correctly 7/10Live video image is noisy 8/10E-mail transmission function does not work 9/1010/10 Upgrade has been terminatedCopyright Notice/How to Use This Manual1/8 Copyright Notice/How to Use This Manual 2/8 Copyright Notice/How to Use This Manual 3/8 Copyright Notice/How to Use This Manual 4/8 Index window Title windowMain window End Previous/Next123 3 ... a B CCopyright Notice/How to Use This Manual 8/8