RCA ProV800C manual Battery Level Indicator, Battery Care and Storage

Page 17

Powering Your Camcorder

Battery Level Indicator

The battery level indicator appears on the LCD monitor or in the viewfinder and shows you the amount of power in the rechargeable battery.

•When appears, the battery is fully charged.

•As the power is used and appear.

•When the battery power is almost gone,

flashes. The camcorder will turn

off automatically after a few seconds. Place the POWER switch in OFF to turn off the camcorder before replacing the battery.

The battery level indicator will not be recorded on the tape when it appears.

Battery Level Indicator

on LCD Monitor or in

Viewfinder

Battery Care and Storage

•Recharging takes approximately 100 minutes depending on the battery’s condition.

•Refreshing takes approximately five hours and 30 minutes depending on the battery’s condition.

•After repeated charging and use, operation time will gradually decrease. When operation time becomes too short to be useful, it is time to replace the battery.

•If the battery discharging must be stopped in the middle, remove the battery from the adapter/charger before unplugging it from the AC outlet.

•Let a hot battery cool down before attaching it to the adapter/charger.

•The battery will provide better service if its power is completely drained before storing it for long periods of time (30 days or more).

•The battery should be charged in the temperature range of 50-95°F (10-35ºC) to prevent damage.

•Do not operate the battery at temperatures below 32°F (0°C) or above 104°F (40°C). The battery may be damaged if operated at temperatures above 122°F (50°C). Operation time will decrease at extremely low temperatures.

•Store the battery at normal room temperature.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents USER‘S Guide Model No ProV800C Serial No Purchase Date Purchased From Product RegistrationAssistance Table of ContentsCare and Maintenance Optional AccessoriesCustomer Assistance and Service PlaybackFirst-Time Operation Unpack the camcorder and accessoriesSlide Lens Cover control to open lens cover Adjust the handstrap to fit your handAttach the adapter/charger Insert a tape Place Power CAMERA/OFF/VCR switch in CameraSelect a recording speed Spep SwitchLCD Monitor Focus Use the LCD Monitor Use the ViewfinderStart and stop recording Place the Power switch in OFF to turn off the camcorderPlay back what you have recorded Details on viewfinder and LCD monitor playback are onPUSH/OPEN Review camcorder’s operating controlsBATT. Release Button AUDIO, RF DC OUT, Display Using the Adapter/Charger to Power Your Camcorder Powering Your CamcorderUsing an Optional Plug Adapter Attach Adapter/ChargerBattery Safety Precautions Using the Battery to Power Your CamcorderAttach the Charged Battery Remove the BatteryUse the Refresh Button Using the Battery to Power Your CamcorderCharge the Battery Battery Care and Storage Battery Level IndicatorOptional Car Cord Adapter Using the DCC08 Car Cord AdapterRecording Tips Video Cassettes Erase Protection Safety TabRecording and Playback Speeds and Times Cassette Recording TimeCassette Care and Storage Inserting and Removing CassettesMaking a Recording RecordingInsert a tape Attach a power supplyUse the Viewfinder Select a recording speed and tape lengthEdit Search Button Edit Search + Button Add fades and wipes Details are on pagesStart and stop recording Zoom in and outBright Dial Use the LCD MonitorEyepiece Focus Control Adjust Viewfinder for Convenient ViewingUse the Viewfinder Status Displays LCD Monitor or Viewfinder DisplaysDetails on Change Indicator Fade and Wipe IndicatorsBattery Level Indicator Zoom IndicatorTime Remaining Display Self-Timer, Animation, and Time- Lapse Indicators58-59 See page 38 for detailsWhite Balance Indicators Exposure IndicatorIndex Indicator Tape LengthMicrophone Tally Light Auto Head CleanerFlying Erase Head Quick RecordTape Positioning Quick Review FeatureCamera Edit Feature Electronic Indexing Full Auto ModePlace the Full AUTO/PRESET switch in Full Auto Exposure Control Place the Full AUTO/PRESET switch in PresetManual Exposure To Turn Off Manual ExposureWhite Balance Place the Full AUTO/PRESETAuto White Balance Manual White BalanceAuto White Balance Manual White Balance Outdoors Sunny Auto Focus Focus Lock Feature FocusingConditions Requiring Manual Focus Set the Full AUTO/PRESET switch to PresetManual Focus To Turn Off EIS Electronic Image Stabilizer EISTo Turn On EIS Digital Zooming ZoomingTo Zoom In and Out To Display the Recording Menu Make sure the Full AUTO/PRESET switch is in PresetRecording Menu To Turn on Tele Macro Recording Menu Tele Macro Zooming FeatureTo Set Gain Up Recording Menu Gain UpFilter Recording Menu Color FilterLength Recording Menu Tape Time-Remaining DisplaySet the Tape Length Recording Menu Title To Add a Preset Title to Your RecordingsCharacter To Create Your Own TitlePress To highlight Title To Turn Off a Title Press to display the set character menuTo Remove Battery Date/Time Display Install the Clock Lithium CellTo Set the Date and Time Recording Menu Date/Time DisplayDate/Time Display Mode selected will be recorded Press Display to select modeDate/Time Display Viewfinder or LCD Monitor Displays To Record the Date, Time, or Date and Time on Your TapeRecording Menu Sub Menu To Change a Feature in the Sub MenuTo Turn the Tally Light on or OFF Sub Menu Tally Light and Jlip ID noPress To highlight Tally To Select a Jlip ID noPlace Full AUTO/PRESET switch Sub Menu Self-TimerTo Set the Self-Timer OFF in the Sub Menu PressSub Menu Animation Recording To Record Using AnimationPress or To select the amount Sub Menu Time-Lapse Recording To Record Using Time LapseTo start Interval Timer To highlight Interval TimerFading or Wiping In and Out Indicator Menu FunctionTo Turn Off Fade or Wipe Place Full AUTO/PRESET switch in Full Auto or PresetTo Fade or Wipe Production Effects Indicator Menu FunctionTo Turn Off a Production Effect When Full AUTO/PRESET switch is in Full AUTO, press PROG.AETo Use a Production Effect To Attach the Shoulder Strap Attaching the Shoulder StrapTraveling Tips Install Cassette Adapter’s Battery Using the Cassette AdapterPlayback Insert Cassette into Cassette AdapterRemove Cassette from Cassette Adapter To Play Back a Tape Attach a power supply Playback Using the LCD Monitor or ViewfinderPress Stop when you are finished Press PLAY/PAUSE to begin playbackStop-Action Pause Tape Positioning Playback FeaturesVisual Searching Time Counter To Use the Memory-Stop FeatureTracking Buttons TrackingPlayback on TV or VCR with AUDIO/VIDEO in Jacks InstallationViewing What the Camcorder is Seeing or Recording Playback Operation and How to Copy Tapes on the VCRPress PLAY/PAUSE Playback on a TV Without Audio/Video Inputs InstallationNormal TV Viewing Playback OperationViewing What the Camcorder Is Recording AC201A Soft Carrying Case DCC08 Car Cord Adapter Optional AccessoriesTo order accessories, contact your local Dealer FB1260 and FB120 Rechargeable Batteries Using the Optional AC088 TripodCPS91 AC Battery Charger Coaxial RF Cables VH82 6-ft VH90 12-ft 1CVA147C RF Output Adapter VH54 Cable TransformerVH83 Audio/Video Cable AH25 Y-AdapterOrder Form for Camcorder Model ProV800C Accessory Order FormPlease complete other side also Authorized Signature United States and Canada Orders To order accessories, contact your local Dealer800 338 Cleaning the Camcorder Care and MaintenanceCleaning the Camcorder’s Lens Cleaning the Camcorder’s LCD MonitorThings to Avoid Proper Care and StorageTrouble Checks Trouble Checks and AdjustmentsSee pages AUTO/PRESET switch in Full Auto . SeePROG.AE/EFFECT to turn off Sepia. See Turn the Tally Light feature on. SeePROG.AE/EFFECT to turn off Cinema. See pages Recording. See pagesE01, E02, etc Information to User SpecificationsReturning equipment to Thomson for repair or exchange Customer Assistance and ServiceLimited Warranty How State Law relates to warranty What your warranty does not coverProduct Registration If you purchased your camcorder outside the USA+ 4 and 3 Buttons Index10,13,15,16,20-23,29,31 Canadian Consumers ConsumersMeridian Street Indianapolis, Part Number 96-ProV800C-1

ProV800C specifications

The RCA ProV800C is a cutting-edge video production switcher that is well-suited for both live events and studio production environments. Designed for professionals in the broadcast and streaming industries, this versatile device combines innovative technologies, robust features, and user-friendly controls, making it a vital tool for engaging audiences with high-quality content.

One of the standout features of the RCA ProV800C is its multi-format support, allowing users to seamlessly transition between various video resolutions and formats. Whether working with HD, SD, or even 4K footage, operators can make quick adjustments without compromising the quality of their output. This flexibility is crucial in today's fast-paced media landscape, where content types frequently vary.

The ProV800C is equipped with a powerful processing engine that delivers exceptional video performance. Advanced scaling technology ensures that all incoming video signals are automatically adjusted to maintain the best possible quality. The switcher supports multiple input sources, such as HDMI, SDI, and even IP streams, enabling content creators to work with various cameras and devices effortlessly.

User experience is paramount in the design of the ProV800C. With an intuitive interface, including a responsive touch screen and customizable buttons, operators can quickly access the functions they need. The mixer supports multiple layers, allowing users to work with graphics, titles, and effects while managing live video feeds, giving them the flexibility to enhance their productions dynamically.

Another notable feature is the built-in keying capabilities. The ProV800C supports chroma keying, which makes it easy to integrate graphics and create visually stunning overlays. This feature is essential for news outlets and entertainment shows that rely on real-time graphics and transitions.

In addition to video production capabilities, the RCA ProV800C incorporates advanced audio mixing functionality. Users can easily synchronize audio with video feeds, ensuring that the final product is not only visually striking but also sonically balanced.

The durability of the ProV800C is evidenced by its rugged design, making it suitable for both field and studio use. Its compact form factor enables portability without sacrificing performance, catering to mobile production teams that require reliable equipment on the go.

In conclusion, the RCA ProV800C stands out as an all-in-one video production switcher, combining flexibility, performance, and ease of use. With its advanced features, including multi-format support, robust processing power, and superior audio capabilities, it streamlines the production workflow, enabling content creators to focus on delivering high-quality visual experiences.
Top Page Image Contents