Yamaha AVX-S30 Adjusting the Speaker Balance, Adjusting the speaker balance With test tones

CONFIGURATIONS

Adjusting the Speaker Balance

The initial speaker settings are suitable for most conditions. However, depending on room conditions or listening position, you may need to adjust the speaker balance manually. In this case, adjust the speaker balance using test tones at first.

y

•When headphones are connected to the SILENT CINEMA jack on the unit, the adjustment is not available.

•Adjust the speaker balance at your listening position with the remote control.

■Adjusting the speaker balance

with test tones

CONFIGURATIONS

TEST

ON SCREEN			SETUP
	ENTER
MENU			RETURN
TV VOL		VOLUME
	MUTE
	NIGHT
TEST	L		R
	1		2
		INPUT
MODE	3		4
MOVIE	MUSIC	SPORTS	GAME

	Front (L)	Front (R)
	Subwoofer	Center
VOLUME +/–
	Surround	Surround
	(L)	(R)

1Press TEST.

The CINEMA DSP indicators blink and each speaker outputs the test tone for about 2.5 seconds in order.

2While a test tone is output from the speaker channel you want to adjust, press VOLUME +/– to adjust the volume level of the currently selected speaker channel.

: Satellite speaker and subwoofer

: Virtual speaker

3To confirm the adjustment, press TEST.

y

•You can check the volume level in detail with the Status indicator (page 18).

•While adjusting the volume level of a speaker, other speakers do not output test tones.

•The adjustable range for the volume level of each speaker channel is as follows.

–Front (L, R): –6 (Min) to ±0 dB (Max)

–Center: –4 (Min) to + 4 dB (Max)

–Surround (L, R): –4 (Min) to +4 dB (Max)

–Subwoofer: –8 (Min) to +8 dB (Max)

•You cannot adjust the volume level of the center speaker channel and surround speaker channels while the DVS function is activated.

•To reset the volume level of all speaker channels to the factory settings, press INPUT on the front panel while a test tone is output. (This procedure also resets the orientations of the virtual surround speakers.)

15