Sanyo 9.1 For Windows XP/Vista users Mounting your camera, Dismounting the camera

Page 12

For Windows XP/Vista users

Mounting your camera

1Set the camera to the card reader mode (page 8).

hThe card is recognized (mounted) as a disk, and the [XACTI (E:)] (or [XACTI_INT (E:)] in case of the camera’s internal memory) window opens.

*The drive name (E:) may be different on your computer.

2 Select an action.

h Select the desired procedure from the [XACTI (E:)] (or [XACTI_INT (E:)] in case of the camera’s internal memory) window.

Dismounting the camera

CAUTION

i To disconnect your camera, be sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or loss of card data.

1Left-click on the icon for safely removing hardware.

hA list appears showing the devices connected to the computer’s USB

connector.

<Windows Vista >

hClose the window.

2Left-click on the camera drive (E:).

hThe camera can now be disconnected.

*The drive name (E:) may be different on your computer.

English 10

Image 12

Contents Sanyo Software Pack 9.1 For Digital Movie Camera English Copyrights Contents Symbols used in this manual IntroductionAbout this manual Software CD-ROM directory mapOperating Environment Windows Mac OSBefore Mounting Your Camera Operating environment WindowsMacintosh Data file formatsConfiguration of directories in the card About the volume nameAbout video clip data recorded with this camera About audio data recorded with this cameraSetting to the card reader mode or mobile viewer mode Select COMPUTER, and press the SET buttonConcerning recharging while connected to the USB terminal Insert and pull out the cable carefullyDo not exchange data bi-directionally To recharge more quicklyFor Windows XP/Vista users Mounting your camera Dismounting the cameraFor Windows 2000 users Mounting your camera Left-click on Unplug or Eject Hardware in the task trayClick on the OK button When using in a Mac OS X Classic environment For Mac OS X users Mounting your cameraInstalling the Application Software About Kodak online service Click on ExitInstall the application HOW to USE Photo Explorer Set up the environmentSet the camera to the card reader mode Run Photo Explorer When copying is completed, click on the OK buttonCopying image data to a computer Click on the Start buttonPhoto Explorer features Activating the Screen Capture mode Screen CaptureSelect Computer and press the SET button Select Screen Capture and press the SET buttonSaving the computer screen image in your camera Run Screen CaptureTo quit Screen Capture Press the buttonUsing AS a PC Camera Before connecting your camera to a computerConnect your camera to a computer Select PC CAMERA, and press the SET buttonHint Connecting in the MTP Mode Select MTP, and press the SET buttonEnglish Main features Create your own movie discsMake slideshows Capture directly to discAdditional features Burn from disc imagesLabels for your discs For questions about MovieFactory