Sanyo 9.1 instruction manual For Windows 2000 users Mounting your camera, Click on the OK button

For Windows 2000 users

Mounting your camera

1Set the camera to the card reader mode (page 8).

hIf a message appears on the computer monitor instructing you to load

the Windows CD-ROM, follow the instructions and install the driver.

hThe camera is recognized as a drive, and [XACTI (E:)] (or [XACTI_INT (E:)] in case of the camera’s internal memory) appears in the [My

Computer] window.

*The drive name (E:) may be different on your computer. h The card is recognized (mounted) as a disk.

h Double-click on the [XACTI (E:)] (or [XACTI_INT (E:)] in case of the camera’s internal memory) icon in [My Computer], and you can process the contents of the card installed in your camera exactly like you would the data in the other computer drives.

Dismounting the camera

CAUTION

i To disconnect your camera, be sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or loss of card data.

1Left-click on [Unplug or Eject Hardware] in the task tray.

hA list appears showing the devices connected to the computer’s USB

connector.

2Left-click on the camera drive (E:).

*The drive name (E:) may be different on your computer. h The [Safe to Remove Hardware] dialog box will open.

3Click on the [OK] button.

hYou can now disconnect the camera.

11English