Sanyo 9.1 instruction manual Setting to the card reader mode or mobile viewer mode

Page 10

Setting to the card reader mode (or mobile viewer mode)

1Start your computer, and use the supplied USB interface cable to connect your camera to the computer.

h Connect the camera’s USB terminal to the computer’s USB connector.

2Turn on the camera (see page 28 in the camera’s instruction manual).

h The USB Connection Screen appears on the camera’s monitor.

To the USB terminal

on the camera

Supplied dedicated

USB interface cable

USB CONNECTION

COMPUTER

PRINTER

MOBILE VIEWER

CANCEL

CANCELOK

To USB connector on the computer

3Select “COMPUTER”, and press the SET button.

hThe screen to select the computer connection mode appears.

4 Select “CARD READER”, and press the SET button. h The camera changes to the card reader mode.

h When connecting a mobile viewer, select “MOBILE VIEWER” and press the SET button. During this time, battery recharging is disabled.

English 8

Image 10

Contents Sanyo Software Pack 9.1 For Digital Movie Camera English Copyrights Contents Introduction Symbols used in this manualAbout this manual Software CD-ROM directory mapOperating Environment Windows Mac OSMacintosh Before Mounting Your CameraOperating environment Windows Data file formatsAbout video clip data recorded with this camera Configuration of directories in the cardAbout the volume name About audio data recorded with this cameraSetting to the card reader mode or mobile viewer mode Select COMPUTER, and press the SET buttonDo not exchange data bi-directionally Concerning recharging while connected to the USB terminalInsert and pull out the cable carefully To recharge more quicklyFor Windows XP/Vista users Mounting your camera Dismounting the cameraLeft-click on Unplug or Eject Hardware in the task tray For Windows 2000 users Mounting your cameraClick on the OK button When using in a Mac OS X Classic environment For Mac OS X users Mounting your cameraInstalling the Application Software About Kodak online service Click on ExitInstall the application HOW to USE Photo Explorer Set up the environmentCopying image data to a computer Set the camera to the card reader mode Run Photo ExplorerWhen copying is completed, click on the OK button Click on the Start buttonPhoto Explorer features Select Computer and press the SET button Activating the Screen Capture modeScreen Capture Select Screen Capture and press the SET buttonTo quit Screen Capture Saving the computer screen image in your cameraRun Screen Capture Press the buttonUsing AS a PC Camera Before connecting your camera to a computerConnect your camera to a computer Select PC CAMERA, and press the SET buttonHint Connecting in the MTP Mode Select MTP, and press the SET buttonEnglish Make slideshows Main featuresCreate your own movie discs Capture directly to discLabels for your discs Additional featuresBurn from disc images For questions about MovieFactory