Sanyo 9.1 Saving the computer screen image in your camera, Run Screen Capture, Press the button

Saving the computer screen image in your camera

1Run Screen Capture.

hScreen Capture is automatically launched when you start your

computer.

<To quit Screen Capture>

hRight-click on [Xacti Screen Capture 1.1] in the task tray, and then left-

click on [Exit]. When the screen to confirm appears, left-click on [Yes].

hTo launch Screen Capture again, click [Start]→[Programs]→[Xacti Screen Capture 1.1].

2On the computer’s monitor, display the window you wish to save. h Make the window you wish to save the active (selected) window.

3Press the [ ] button.

hThe currently displayed active window is saved as a bitmap image in the camera’s memory.

hWhen there is no active window, the entire screen display is saved. h The saved data is stored in the \DCIM\***SANYO folder in the drive for

the camera.

h To exit Screen Capture, quit the application.

HINT

i To use Screen Capture, only one camera should be connected to the computer.

i The maximum file size that can be saved for any one screen capture is

10 MB.

iWhen running Screen Capture, do not turn off the camera or remove the card from the camera, as doing so may result in the loss of data. Also, do not use the computer to process the data in the camera’s card or internal memory, or the camera may not operate normally.

English 20