Sierra Wireless DART 200 CDPD Modem manual Device Attachment, Vehicle Installation Considerations

DART 200 CDPD Modem User’s Guide

	DART TCP capabilities	5-14
	Friends Only mode operation	5-14
	TCP communication	5-15
	Setup options	5-17
	Sample TCP setups	5-19
	Remote TCP setup	5-19
	Host TCP setup	5-21
	SLIP	5-22
	Modem setup for SLIP	5-22
	SLIP IP Address overview	5-24
	SLIP operation	5-26
	SLIP initial testing	5-27
	Telnet	5-28
	Setup options	5-28
	Telnet escape commands	5-30
	New for this version	5-31
	Binary mode considerations	5-31
	Telnet operation	5-31
6	Device Attachment	6-1
	RS-232 connection	6-1
	Null modem function	6-1
7	Vehicle Installation Considerations	7-1
	Electrical transients	7-1
	Application considerations	7-1
	Proximity to other antennas	7-2
8	Application Programming	8-1
	AT Command Set Support	8-1
	Device drivers	8-2
	Application program structure	8-2
	DART setup	8-2
	Network connection	8-2
	Data transfer	8-3
	Modes of operation	8-3
	Error recovery	8-4
	Automatic registration	8-6
	Registration timer	8-7
	Manual registration	8-7
	Auto-Registration at power-on	8-7
	Auto-Registration when not registered	8-8

PN1197-00 Revision 1.0 vii